512470
14
Zoom out
Zoom in
Previous page
1/84
Next page
Chapter 1-2
Robomow RL555, RL855, RL2000
1.1.3 Determine location of Power Supply
P The Base Station should be close enough (15 m/50 ft) to
a wall electrical socket (230V / 120V). The indoor Power
Supply unit will be connected to it.
P Robomow’s 15 m (50 ft) low voltage cable connects
to the power supply unit. The length of the low voltage
cable must NOT be changed.
P Select the right location for the power supply unit:
The power supply is suitable for indoor use only. Choose a
sheltered, dry, well ventilated spot.
It should NOT be exposed to direct sunlight or rain.
1.2 Planning the Perimeter Wire’s layout
The Perimeter Wire functions as an “invisible wall” for Robomow. It sets
the boundaries of lawn zones and it surrounds specific areas where you
do not want Robomow to enter.
The Perimeter wire is held to the ground with small pegs, supplied with
Robomow. Soon after setting, the wire will become invisible under the
growth of new grass.
As soon as Robomow starts operating, it turns on a signal that runs along
the Perimeter Wire. This signal keeps Robomow within its working zones
and away from preset demarcated areas.
1.2.1 Is your lawn a single contiguous area?
If grass areas are contiguous, Robomow
will automatically mow all zones tracking the
Perimeter Wire you set around the lawn.
1.2.2 Does your lawn have more than one zone?
If your lawn areas are separated by fences,
sidewalks or other objects, you may wish to
set Robomow to work in more than one zone.
Create separate zones in more than one way:
P You may use one Perimeter Switch or one
Base Station
















: Connect all zones
together in one long loop of the Perimeter Wire.
The Perimeter wire can be as long as 500
meters (1650 ft) in one loop
Or
:
P You may set both Base Station
















and a
Perimeter Switch: Connect one or more zones
to the Base Station. In addition, connect other
zones to a Perimeter Switch available as an
accessory for RL2000.
The Perimeter Switch may be moved from one
zone to another.
To switch zones, Robomow will be driven or
carried to the proper location.
































Indoor power supply
fixed to the wall
Max
15 m (50 ft)
The Fence
should be
inside lawn
15 m (50 ft) extension
cord (low voltage)
Indoor use only
Base
Zone
Zone A
Zone B
Maximum length of
wire connected to the
Base Station in one
loop is 500 m (1650 ft)
While the picture shows two wires
separate, they should be adjacent
Base
Station
Base
Station
Min 1 m
(3 ft)
>1.5 m
(4.9 ft)
Perimeter Switch
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RL serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RL serie in the language / languages: English as an attachment in your email.

The manual is 19,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RL serie

Robomow RL serie User Manual - German - 84 pages

Robomow RL serie User Manual - Dutch - 84 pages

Robomow RL serie User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info