512470
9
Zoom out
Zoom in
Previous page
1/84
Next page
Introduction - 7
Introduction
Que contiennent les boîtiers
1 Robomow
®
9
Supports de roue de station de base
Utilisés pour supporter les roues de traction
de la Robomow lorsqu'elle entre et sort de la
station de base.
17
Connecteurs de câble
Utilisés pour l'épissage des câbles (si
nécessaire).
2 Paquet d’énergie 10
Vis x 2
Utilisées pour assembler les supports de roues
de la station de base à la station de base.
18
Prises de commutateur
Utilisés pour connecter le câble
périphérique au commutateur de
périmètre/à la station de base.
3
Câble périphérique
Utilisé pour créer un mur virtuel pour votre
Robomow.
11
Cordon d'extension (Câble basse tension
de 15 mètres)
19
Vis x 2
Utilisées pour assembler le couvercle
de station sur sa base.
4 Piquets - Utilisés pour fixer le câble au sol. 12
Alimentation électrique pour intérieur
(Pour alimenter la base et pour recharger
Robomow pendant l’hiver)
20
Support d'alimentation électrique
(+ vis et goujons) Utilisé pour fixer
l'alimentation électrique à un mur.
5 Station de base assemblée. 13
Piquets pour la station de base - Utilisés pour fixer
la station de base au sol.
21 Commutateur de périmètre
6
Couvercle de station de base
Utilisé pour recharger le paquet d’énergie de la
Robomow et permet d'activer le câble périphé-
rique.
14 Manuel d'utilisation et de sécurité 22
Piquet de commutateur de périmètre
- Utilisé pour maintenir le commutateur
de périmètre à la verticale du sol.
7
Base - Utilisée pour diriger la Robomow vers les
contacts de recharge.
15 DVD – Vidéo d'installation et d'utilisation. 23
Alimentation électrique pour
commutateur de périmètre – Utilisé
pour permettre le fonctionnement du
commutateur de périmètre. Batteries
disponibles comme accessoire
8
Barrière de chargement
Utilisée pour empêcher la Robomow de monter
sur la station de base durant son fonctionnement.
16
RoboRègle
Utilisé pour régler la distance entre le câble
périphérique et la bordure de la pelouse.
24
Alimentation électrique pour inté-
rieur (pour charger Robomow)
Introduction
Introduction 7
What’s in the Boxes
1
Robomow
®
9
Base Station wheel supports Used
for supporting Robomow drive
wheels when entering and departing
the Base Station.
17
Wire connectors
Used for splicing wires (as
needed).
2 Power Pack 10
Screws x2
Used for assembling the Base
Station wheel supports to the Base
Station.
18
Plot connector
Used for connecting the completed
perimeter wire set-up to the
perimeter switch/Base Station.
3
Perimeter Wire
Used to create a virtual wall for your
Robomow.
11
Extension cord (15meters low
voltage cable)
19
Screws x2
Used for assembling the Base
Station Cover to the Base.
4
Pegs - Used for securing the wire to the
ground.
12 Indoor Power Supply 20
Power Supply holder (+ screws
and dowels) Used for fixing the
Power Supply to a wall.
5 Assembled Base Station. 13
Base Station Stakes -Used for securing
the Base Station to the ground.
21
Perimeter Switch
6
Base Station Cover
Used for recharging the Robomow Power
Pack and activates the perimeter wire.
14 Operating & Safety Manual 22
Perimeter Switch Stake - Used to
hold the perimeter switch vertical to
the ground.
7
Base - Used for directing the Robomow
to the charging contacts.
15 DVD – Setup and Operation video. 23
Power Supply for Perimeter
Switch – Used for operating the
perimeter switch. Batteries
available as an accessory
8
Charging Fence
Used for preventing the Robomow to
climb on the Base Station during
operation.
16
RoboRuler
Used for setting the distance of the
perimeter wire from the lawn edge.
24
Power Supply
(for charging Robomow)
2
1
3
4
5
6
7
8
9
11
12
13
15
10
19
17
18
20
RL2000 ONLY
14
21
22
23
24
16
RL555/855ONLY
Operating & Safety Manual
RL MODELS
WWW.ROBOMOW.COM / WWW.ROBOMOW.EU
DOC0100D
RL2000 UNIQ
RL555/855 UNIQ
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RL serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RL serie in the language / languages: French as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RL serie

Robomow RL serie User Manual - English - 84 pages

Robomow RL serie User Manual - German - 84 pages

Robomow RL serie User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info