644647
8
Zoom out
Zoom in
Previous page
1/52
Next page
8
2.2 How Robomow Works for You
• First, you need to install a perimeter wire around the entire lawn
and around protected areas within the lawn area.
• The Perimeter Wire sets the boundaries for Robomow. The
Perimeter Wire is laid around the edges of the lawn and around
trees, plants, ponds and objects that you want to prevent
Robomow to run into.
• If the supplied wire is not sufcient, more wire can be purchased
and spliced with a supplied connector to the existing wire.
• Small pegs are used to fasten the Perimeter Wire into the
ground, below grass level.
• The Perimeter Wire will gradually disappear under the growth
of new grass until it will be invisible.
• The Base Station is placed along the Perimeter Wire. It performs
two basic functions:
- Generate a signal along the Perimeter Wire.
- Charge Robomow’s batteries.
• The Power Box is connected between the Base Station and a
230V / 120V wall socket, using a 15m (50 ft.) long low voltage
cable.
• After having completed the installation of the Perimeter Wire, Base Station, and the Power Box, and performing
the One-Time Setup [needs to be performed before operating Robomow for the rst time – detailed
instructions are in the following chapters], Robomow will do all the mowing for you for during the entire season!
• Robomow is a robotic lawn mower that is powered by a maintenance-free battery. It leaves its Base Station at
scheduled mowing times. Robomow mows the lawn and then drives back to the Base Station to be charged and
ready for its next scheduled mowing.
• As soon as Robomow departs for mowing, the Base Station automatically triggers a special signal. This signal
creates a virtual wall, visible only to Robomow. This signal keeps Robomow within the lawn boundaries, and
prevents it from entering areas it was intended to skip or protect.
Tree surrounded by a groove, ditch or flower beds
requires a wire around it.
Perimeter wire as a
virtual wall,visible only
to Robomow
Base Station and Power Box:
- Generates signal along the wire.
- Charges Robomow’s battery.
Large trees: Robomow is allowed to bump
into them. at this size, the objects do not
require a Perimeter Wire around them
Robomow detects the signal
and changes direction as it
reaches the wire
Large trees: Robomow is allowed to bump into
them. at this size the objects do not require a
Perimiter Wire around them
Base Station and Power Box:
- Generates signal along the wire.
- Charges Robomow’s battery.
Robomow detects the signal and
changes direction as it reaches
the wire
Perimiter wire as a virtual
wall, visible only to Ro-
bomow
Tree surrounded by a groove, ditch or ower beds requires
a qire around it.
Peg
Perimiter Wire
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RC312 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC312 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC312

Robomow RC312 Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info