664048
38
Zoom out
Zoom in
Previous page
1/58
Next page
37
EN
Screen Seng Descripon Opons
P008
Rain Sensor
Sensitivity
(Default = 2)
• ThismenudenesRainSensor’ssensitivity.
• The numbers in the menu represent the following levels of sensitivity:
1 – LOW
2 – MEDIUM
3 – HIGH
• The higher the Sensitivity setting, the more sensitive Robomow is to
rain detection.
1/2/3
P009
Edging On/Off
(Default = ON)
• Edging is a special mode, in which Robomow follows the perimeter
wire for complete and accurate mowing of the lawn edges.
• In lawns where the edge is not maintained well and the mower fails
to complete the drive along the edge of the lawn, it is recommended
to set Edging to ‘Off’.
• Setting Edging to ‘Off’ disables Edging mode in automatic departures
from the station, but still allows edge-mowing when pressing the
‘Edge’ mode button on the operating panel.
On/OFF
P010
Child Lock
(Default = OFF)
• The Child Lock feature locks the buttons to prevent unintended
operation, especially by children and pets.
• If the Child Lock is set to ‘On’, to operate the mower it is required to
rstpressoneoftheoperatingmodebuttonsandthentopressthe
OKbuttontoconrm.
On/OFF
P011
Anti-Theft /
Disabling Device
(Default = OFF)
• The Anti-Theft / Disabling Device feature alarms the surroundings
in the event of an unintended use or removal of the mower from its
designated area.
• ToturntheAnti-Theft/DisablingDeviceOnforthersttime,setitto
‘On’ and choose a PIN code of 4 digits.
Tip: Select a number you can remember. Write it down (bottom of
Chapter 10), and keep it in a safe place.
• When the Anti-Theft / Disabling Device system is activated, 0000 will
be displayed. Enter your 4-digit code to deactivate the Anti-Theft /
Disabling Device.
• If the code is not entered, then the message is changed to U062
(Alarm will soon be activated). Enter the code, otherwise the alarm
will start.
ON/OFF
1234
P012
Anti-Theft /
Disabling Device
Change PIN code
• Allows changing of the Anti-Theft / Disabling Device PIN code.
• Enteranewcodeandthenre-enterthenewcodeforconrmation.
0000
P013
Base Station
(Default = ON)
• This option should be used in a Separated Zone which has a
Base Station
• Ifyouhavedenedmorethanonezone,thenselecttherelevant
zone before changing the setting.
On/OFF
P014
Add Separated
Zone
• Enables the addition of a Separated Zone.
• L2 is displayed for Separated Zone A – press OK.
• Scroll to set the area of the Separated Zone and press OK.
L2
100
P015
Remove Zone
• Enables the removal of a Separated Zone or a Sub-Zone.
• Choose the Zone you want to remove and press OK.
L2/L3
A1
/A2/A3/
A4
P016
Sound
(Default = ON)
• Use the Sound option to turn all non-safety sounds off.
On/OFF
P017
Mobile
Communication
System
(Default = OFF)
• Enables remote communication with the mower using a GSM
Module Accessory, which can be purchased separately.
• For more information, refer to Section 12 – Accessories.
On/OFF
P018
Statistics (Default
= OFF)
• This menu is displayed only if P018 is set to ‘On’.
• Enables to send the operation statistics from the mower to the
manufacturer for diagnostics in case of problems.
On/OFF
38


Need help? Post your question in this forum.

Forumrules
1

Forum

robomow-rc308-pro

Reset search

  • I have used my mower twice on manual recently with no problems. However I have set it up for Automatic and it is reading PAUS. In the manual it advises me to use the Automatic Operation On/of on my remote control, however I was never supplied with a remote control. Could you advise me how to override the PAUS button on my mower display panel. As I have been unable to contact your agent at present, I would appreciate your help. Thank you. Hedley Best. Submitted on 18-4-2020 at 15:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RC308 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC308 Pro in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC308 Pro

Robomow RC308 Pro Quick start guide - English - 4 pages

Robomow RC308 Pro User Manual - German - 58 pages

Robomow RC308 Pro User Manual - Dutch - 58 pages

Robomow RC308 Pro User Manual - French - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info