Manual Robomow RC308 Pro (page 18 of 58) (English)

664048

Zoom out

Zoom in

1/58

4.2.1 Starting Point: Perimeter Wire at the Base Station area.

• Place the Base Station, according to your plan, as shown in the

guretotheright.

Do not place the Base Station within 3m (10 ft.) after a corner

• Select the roll of wire with a green plot connector attached to

the end.

• Pull the plot connector and some wire out of the plastic covering.

Do not remove the spool of wire from its covering. The plastic

covering is the dispenser for the wire.

• Peg the beginning of the wire to the ground, where the Base

Station will be located. Pegs are supplied in the Robomow’s

box.

• Pull out 30 cm (12 inches) of wire and leave it loose near the

Base Station location. Later, at the end of the setup, this part of

the wire will close the Perimeter Wire loop.

• Start laying the wire in an anticlockwise direction.

• Continue to pull the Perimeter Wire out of its covering, laying it

loosely as you walk along the lawn edge.

If you get to any area/object that needs care or special boundaries, make sure you carefully lay the

Perimeter Wire as needed. The next sections deal with such special cases.

4.2.2 Laying the Perimeter Wire

o The Perimeter Wire is secured to the ground by pegs

supplied with Robomow. Initially insert pegs every

few meters and at corners. At this early stage set a

minimum number of pegs. Later, after testing the wire

setup, you will insert all necessary pegs.

o After uncoiling some wire, before inserting pegs, use

the RoboRuler to determine the distance of the wire

from the lawn edge or obstacles.

• Iftheworkingareaborderswithaatarea,aower

bed, a small cliff (not more than 1 cm / 0.4”), or a

small stair (up to 5 cm / 2”), the Perimeter Wire

should be laid 20 cm (8 inches) inside the working

area. Use the shorter distance of the RoboRuler to

set the distance of the wire from the lawn edge.

• If the edge is going though a sloped area (max 10%

is allowed) or is bordered with high obstacles such

as a wall or fence, the Perimeter Wire should be laid

at a distance of 28 cm (11 inches) from the obstacle.

Use the longer distance of the RoboRuler to set the

distance of the wire from a wall.

20cm (8”)

28cm from Wall (11”)

Perimeter Wire

Peg

Min. 3m (10 ft)

from any corner

I have used my mower twice on manual recently with no problems. However I have set it up for Automatic and it is reading PAUS. In the manual it advises me to use the Automatic Operation On/of on my remote control, however I was never supplied with a remote control. Could you advise me how to override the PAUS button on my mower display panel. As I have been unable to contact your agent at present, I would appreciate your help. Thank you. Hedley Best. Submitted on 18-4-2020 at 15:33
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC308 Pro in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC308 Pro

Robomow RC308 Pro Quick start guide - English - 4 pages

Robomow RC308 Pro User Manual - German - 58 pages

Robomow RC308 Pro User Manual - Dutch - 58 pages

Robomow RC308 Pro User Manual - French - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robomow RC308 Pro Manual

Product: