Manual Robomow RC308 Pro (page 9 of 58) (English)

664048

Zoom out

Zoom in

1/58

2.2 How Robomow Works for You

• First, you need to install a perimeter wire around the entire lawn

and around protected areas within the lawn area.

• The Perimeter Wire sets the boundaries for Robomow. The

Perimeter Wire is laid on the edges of the lawn and around

trees, plants, ponds and objects that you want to prevent

Robomow to run into.

• Ifthesuppliedwireisnotsufcient,morewirecanbepurchased

and spliced to the existing wire with a supplied connector.

• Small pegs are used to fasten the Perimeter Wire into the

ground, below grass level.

• The Perimeter Wire will gradually disappear under the growth

of new grass until it will be invisible.

• The Base Station is placed along the Perimeter Wire. It performs

two basic functions:

- Generate a signal along the Perimeter Wire.

- Charge Robomow’s batteries.

• The Power Box is connected between the Base Station and a

230V / 120V wall socket, using a 15m (50 ft.) long low voltage

cable.

• After completed the installation of the Perimeter Wire, Base Station, and the Power Box, and performing the

One-Time Setup (needs to be performed before operating Robomow for the rst time – detailed instructions

are in the following chapters), Robomow will do all the mowing for you for during the entire season!

• Robomow is a robotic lawn mower powered by a rechargable battery. It leaves its Base Station at scheduled

mowing times. Robomow mows the lawn and then drives back to the Base Station to be charged and ready for

its next scheduled mowing.

• As soon as Robomow departs for mowing, the Base Station automatically triggers a special signal by the

Perimeter Wire. This signal creates a virtual wall, visible only to Robomow. This signal keeps Robomow within

the lawn boundaries, and prevents it from entering areas it was intended to skip or protect.

• In order to prevent lawn’s damage at the Base Station area and in order to improve lawn’s coverage, Robomow

will drive from the Base Station at a random distance (between 90cm to 120cm) and will randomly select an

angle of departure between 40 to 90 degrees.

Large trees: Robomow is allowed to bump into

them. at this size the objects do not require a

Perimiter Wire around them

Base Station and Power Box:

- Generates signal along the wire.

- Charges Robomow’s battery.

Robomow detects the

signal and changes

direction as it reaches

the wire

Perimiter wire as a virtual

wall, visible only to

Robomow

Treesurroundedbyagroove,ditchorowerbedsrequires

a qire around it.

Peg

Perimiter Wire

I have used my mower twice on manual recently with no problems. However I have set it up for Automatic and it is reading PAUS. In the manual it advises me to use the Automatic Operation On/of on my remote control, however I was never supplied with a remote control. Could you advise me how to override the PAUS button on my mower display panel. As I have been unable to contact your agent at present, I would appreciate your help. Thank you. Hedley Best. Submitted on 18-4-2020 at 15:33
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC308 Pro in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC308 Pro

Robomow RC308 Pro Quick start guide - English - 4 pages

Robomow RC308 Pro User Manual - German - 58 pages

Robomow RC308 Pro User Manual - Dutch - 58 pages

Robomow RC308 Pro User Manual - French - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robomow RC308 Pro Manual

Product: