724746
52
Zoom out
Zoom in
Previous page
1/84
Next page
50 51
Adding Sub Zones
If your lawn has additional zones and they are connected to
your main zone by a narrow passage (we call such zones
“Sub Zones”), you need to tell your mower how to get to
these zones.
To do this, press “Settings” on mower’s panel for more than
3 seconds. Scroll to get to menu P022. The table below
describes how to use this menu to program a Sub Zone.
Menu Setting Description
P022 Add Sub-Zone
Upon entering the menu A1/A2/A3/A4 is displayed. This
is a name of the next available Sub Zone, which you can
program. Press OK
If the mower is currently not at the Base Station, a
message U044 (“Place the mower in the Base Station”)
will be displayed. Place the mower in the Base Station
and press OK.
The mower will travel along the perimeter wire to the
Sub Zone on its own.
When the mower is at least 5 m (16 ft) inside the Sub
Zone, press STOP and select the area size of the Sub
Zone. Press OK.
The distance to the Sub-Zone’s entry point can be
updated later through menu P023
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RC308 Pro - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC308 Pro - 2020 in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC308 Pro - 2020

Robomow RC308 Pro - 2020 User Manual - German - 84 pages

Robomow RC308 Pro - 2020 User Manual - Dutch - 84 pages

Robomow RC308 Pro - 2020 User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info