644650

Robomow RC304 - 2016 Manual

20
Zoom out
Zoom in
Previous page
1/58
Next page
19
EN
4.3 Perimeter Wire within the Working Area
4.3.1 Hard Obstacles
o Obstacles that can withstand a collision, for example, trees or bushes
higher than 15 cm (6”), do not need to be demarcated by the Perimeter
Wire. Robomow will turn when it collides with this type of obstacle.
4.3.2 Perimeter Islands
o Use the Perimeter Wire to demarcate areas inside the working area by creating islands around obstacles that
cannot withstand a collision, for example, ower beds and fountains.
o Continue uncoiling the wire, moving from the edge towards the protected object.
o Peg the Perimeter Wire around the protected object in a clockwise direction.
o Complete bordering the island and return to the spot where you left the lawn’s edge
o The wires leading to the Island and from it should be parallel and touching. Therefore, peg both wires, to and
from the island, together with the same pegs.
o Robomow will not recognize these two wires. It will mow over them as if they do not exist.
o Robomow will recognize the single blocking wire around the Perimeter Island and will not enter this area.
Perimiter Wire Position
Perimiter Wire
2 Wires under
same peg
Direction of setup:
Clockwise around
obstacle
Min. distance between
islands: 1m (3.3ft)
Otherwise, demarcate
jointly as one island
CAUTION ! Setting the Perimeter Wire anticlockwise around an obstacle
will cause the mower to drive into the island.
Keep the following distances when setting Perimeter Islands:
- The minimum distance of the Perimeter Wire from
the protected area should be 28 cm (11 inches).
- If you need to protect a thin object, set the minimum
radius of the Island to 35 cm (15 inches).
- Maintain a minimum of 1m (3.3 ft.) between adjacent
islands.
- Maintain a minimum of 1m (3.3 ft.) between island
wire and the Perimeter Wire.
- If protected objects are grouped closely together,
demarcate them as a single Perimeter Island.
Note! A Perimeter Island should either be
rectangular or round.
28cm
28cm
Min 1m
28 cm
28 cm
… 20 …


Need help? Post your question in this forum.

Forumrules
1

Forum

robomow-rc304---2016

Reset search

  • After putting my fully charged Robomow rc304 in it's base station after the winter, both lights are flashing on the power box. The battery icon is now red. I have checked all the connections. Turned it off then on after 10 seconds. No change, lights still flashing, no beeping. Submitted on 20-3-2020 at 19:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RC304 - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC304 - 2016 in the language / languages: English as an attachment in your email.

The manual is 5,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC304 - 2016

Robomow RC304 - 2016 Quick start guide - English - 4 pages

Robomow RC304 - 2016 User Manual - German - 62 pages

Robomow RC304 - 2016 User Manual - Dutch - 62 pages

Robomow RC304 - 2016 User Manual - French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info