Manual Robomow RC304 - 2016 (page 14 of 58) (English)

644650

Zoom out

Zoom in

1/58

There are two options to set the Base Station:

3.2.2 Internal Setup (on the lawn perimeter)

• Choose a place along the Perimeter Wire where

you want to place the Base Station, based on the

onditions detailed in paragraph 3.2.1.

• Place the Base Station in the direction shown in the

gure to the right.

3.2.3 External Setup (off the lawn perimeter):

Scan the code to watch the

video on how to install an

external base.

There are two types of External Setup:

At a corner

In this type of setup, the Base Station is located at one of

the corners of the lawn, as shown in the gure at the right.

• Choose a corner where you want to place the Base

Station outside of the lawn area.

• Place the Base Station, where its front side is touching

the lawn edge or placed somewhere on the lawn.

• Continue to lay the perimeter wire as shown in the gure

on the right, where it continues at least 10cm (4”) beyond

the Base Station and turns back towards the lawn at a

distance of 10cm (4”) from the other wire.

• The Base Station may be placed in a small shift to the

right, in order to allow smooth entry of the mower to the

Base Station.

• Later you will have the opportunity to adjust the Base

Station position to conrm smooth entry.

Outside the lawn

(Can be set only through the Robomow App for specic models)

• Choose a place outside the lawn where you want Robomow to dock and charge.

• Conrm the path between the lawn and the outside area is smooth with no height difference, so Robomow will

not get stuck and will follow the wire smoothly.

• The surface between the lawn and the Base Station should be hard (such as a sidewalk or rigid ground) and

not sandy or stony, so Robomow will not slip or get

stuck on it.

• The area between the lawn and the Base Station

should be clear of obstacles and objects.

• Lay the wire as shown in the gure to the right:

- Narrow path of 50cm (20”) width.

- Square Perimeter Island of 30cm (12”) edges.

- Island starts 50cm from the Perimeter Wire.

- Keep a distance of 10cm (4”) between Perimeter Wire

and the Island from both sides.

- The front of the Base Station should be placed a

minimum distance of 1.8m (6 ft.) from the Perimeter

Wire and NOT more than 4m (13 ft.).

Min. 10cm (4”)

10cm (4”)

Perimeter

Island 30cm

50cm

(20”)

50cm

(20”)

Min 1.8m (6ft)

Max 4m (13ft)

5-4cm

Min. 10cm (4”)

10cm (4”)

Main Zone

After putting my fully charged Robomow rc304 in it's base station after the winter, both lights are flashing on the power box. The battery icon is now red. I have checked all the connections. Turned it off then on after 10 seconds. No change, lights still flashing, no beeping. Submitted on 20-3-2020 at 19:49
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC304 - 2016 in the language / languages: English as an attachment in your email.

The manual is 5,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC304 - 2016

Robomow RC304 - 2016 Quick start guide - English - 4 pages

Robomow RC304 - 2016 User Manual - German - 62 pages

Robomow RC304 - 2016 User Manual - Dutch - 62 pages

Robomow RC304 - 2016 User Manual - French - 62 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robomow RC304 - 2016 Manual

Product: