644650
30
Zoom out
Zoom in
Previous page
1/62
Next page
29
DE
Kapitel 5 –
Vorbereitung des Robomow
Bevor Sie den Robomow zum ersten Mal verwenden, müssen Sie einige einfache Einstelllungen vornehmen.
Wenn Sie die Vorbereitung komplett abgeschlossen haben, ist Ihr Robomow bereit, Ihren Rasen zu mähen.
5.1 Einstellen der Schnihöhe
Verstellbereich der Mähmesser 15 – 60 mm (0,6 – 2,4 Zoll)
Stellen Sie die Schnitthöhe wie folgt ein:
VORSICHT! SCHALTEN SIE IMMER DEN
SICHERHEITSSCHALTER AUS, BEVOR SIE DIE
SCHNITTHÖHE EINSTELLEN!
• Heben Sie die Vorderseite des Mähers hoch
• Drehen Sie den Knopf und drücken Sie ihn gleichzeitig
nach unten
• Für eine größere Schnitthöhe drehen Sie im Uhrzeigersinn
• Für eine kleinere Schnitthöhe drehen Sie gegen den
Uhrzeigersinn
• Die Schnitthöhe wird auf der Seite des Mähers angezeigt
5.2 Einmalige Einrichtung (Schri für Schri)
Stellen Sie sicher, dass der Sicherheitsschalter eingeschaltet
und das Bedienteil eingesteckt ist, bevor Sie die einmalige
Einrichtung starten.
Nun ist der Mäher für das Verfahren der einmaligen
Einrichtung bereit.
! WICHTIG !
Um den einmaligen Setup-Vorgang erneut zu starten, drücken Sie gleichzeitig die
Tasten STOPP + Einstellung + Links-Pfeil und halten diese länger als 4 Sekunden gedrückt.
Dadurch werden die Einstellungen auf die Werkseinstellungen zurückgesetzt.
5.2.1
Verwendung des Bedienfelds
Verwenden Sie die Tasten am Bedienfeld wie folgt:
• Drücken Sie die Pfeile "nach Rechts" oder "Nach Links",
bis Ihre gewünschte Option angezeigt wird.
• Drücken Sie die OK Taste , um den angezeigten Wert zu
übernehmen.
• Drücken Sie die Taste "Zurück" (STOPP), um
zurückzugehen oder Ihre Auswahl rückgängig zu
machen.
5.2.2
Wählen Sie Maßeinheiten und -Formate
Zone /
Entfernung
Temp. Uhr
EU Meter Celsius
24
Stunden
US Fuß Fahrenheit
12
Stunden
(AM/PM)
Sicherheitsschalter
HIGHLOW
Anpassung der
Schnitthöhe
HOCH
NIEDRIG
ok
STOP
Rechts-/Links-Pfeile
Einstellungstaste
30


Need help? Post your question in this forum.

Forumrules
1

Forum

robomow-rc304---2016

Reset search

  • After putting my fully charged Robomow rc304 in it's base station after the winter, both lights are flashing on the power box. The battery icon is now red. I have checked all the connections. Turned it off then on after 10 seconds. No change, lights still flashing, no beeping. Submitted on 20-3-2020 at 19:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RC304 - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC304 - 2016 in the language / languages: German as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC304 - 2016

Robomow RC304 - 2016 Quick start guide - English - 4 pages

Robomow RC304 - 2016 User Manual - English - 58 pages

Robomow RC304 - 2016 User Manual - Dutch - 62 pages

Robomow RC304 - 2016 User Manual - French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info