644646
53
Zoom out
Zoom in
Previous page
1/62
Next page
42
Troubleshooting
11 Automatic operation is disabled by Program On/Off menu Enable automatic operation through Program On/Off menu (see
Section 4.3.8).
12 Automatic operation is put on pause by the Power Box Enable automatic operation on the Power Box (see Section 5.3).
13 All week days are set as inactive days Validate Inactive Time settings (see Section 4.3.1)
14 The mower is being charged directly by the Power Box (via the
charging adaptor)
Disconnect the mower from the charging adapter (see Section 6.2).
Put the mower in the Base Station.
15 Battery cells are being balanced in special charging mode None. Wait for the end of current charging cycle. May take longer
than usual.
16 The mower is in the Base Station, but there is no charging
voltage supply
Inspect Power Box’s connection to the Base Station. Confirm that
nothing is blocking the charging pins.
17 Low ambient temperature None. The mower will automatically depart when it gets warmer.
18 Sub-Zone entry problem. The mower was unable to enter one of
the Sub-Zones
Refer to “Sub-Zone X Problem“ message in Section 7.2.
7.3.1 Description of Non-Depart Codes
00 None. Automatic departure is working properly None. Wait for the end of current charging cycle.
01 Mower’s battery is not yet in the required state for automatic
departure
None. Wait for the end of current charging cycle. May take longer
than usual.
02 Inactive Time is activated. No automatic departure during
Inactive Time
None. Validate Inactive Time settings (see Section 4.3.1).
03 Mowing cycle is completed. Waiting for the next scheduled
operation
None.
04 Humid conditions or rain were detected during last 30 minutes None. If the rain has stopped, wait at least for another 30 minutes.
If there was no rain at all, consider adjusting rain sensor’s sensitivity
(see Section 4.4.3) or call Robomow Hotline.
05 The mower is switched off Switch on the Safety Switch.
07 User response (interaction) is required in order to continue
current operation
Acknowledge the message on the screen.
08 Multiple consecutive mowing operations were shorter than
expected. Usually accompanied by “Mowing or charging times
are shorter than usual” user message (see Section 7.2)
Inspect mower’s blade and drive wheels.
Battery run-time may be too short.
09 One-Time setup is running One-Time setup should be completed before the automatic
operation can start.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow MS2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow MS2500 in the language / languages: English as an attachment in your email.

The manual is 16,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow MS2500

Robomow MS2500 User Manual - German - 62 pages

Robomow MS2500 User Manual - Dutch - 64 pages

Robomow MS2500 User Manual - French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info