537232
21
Zoom out
Zoom in
Previous page
1/54
Next page
11
Initial Setup
EN
Leave the four pegs 4 – 7 standing half-way out.
They will later be connected to the wire after you finish
setting the Perimeter Wire around the Sub-Zone.
Complete setting Perimeter Wire around the Sub-Zone until
you come back to peg #4.
Lay the Perimeter Wire through pegs 4 – 7 in sequential
order. Insert the pegs all way to the ground, to keep the wire
attached to the ground
Lay the wire along the Narrow Pass parallel to the first
wire.
Maintain a 14 cm (0.5 ft.) distance between the wires in
the pass.
Back at the pass entrance: Lay the wire through remaining
pegs
5
,
6
,
7
.
Insert the pegs all way to the ground, to keep the wire attached to
the ground.
Resume laying the Perimeter Wire in the Main Zone towards the Base
Station.
2.3 Separated Zone(s)
If the lawn has one or more zones that are separated and if the mower
cannot drive from one zone to the other, an additional setting is required.
In such cases, the mower will have to be driven or carried between the
zones.
A minimum of 1 m (3.3 ft.) must be kept between the wires of the
Separated Zone and the Main Zone.
2.3.1 Setup for a Separated Zone that can be
completely mowed in a single operation
If possible, the separated area may be
connected to the main area’s Perimeter Wire.
No special accessories are needed.
If the areas cannot be connected to the
Perimeter Wire of the Main Zone.
The Separated Zone will have its
own Perimeter Wire.
The Perimeter Wire will be connected to an additional Perimeter
Switch (Optional accessory).
Install the Perimeter Switch according to instructions boxed with
the Perimeter Switch accessory.
Set a Perimeter Wire in the Separated Zone.
2.3.2 Setup for a Separated Zone that requires
more than a single operation to complete
mow the area.
Additional separate Station, including a
Power Box (optional accessories) are
required for this installation.
Install the station according to instructions
boxed with the separate Base Station.
Set a Perimeter Wire in the Separated Zone.
B
1
Lay the Perimeter Wire through
Main Zone
Sub-Zone
Ending the Sub-Zone passage setup
Separated Zone smaller than
200 m² (2150 ft²)
Main Power
Box & Base
Station
Additional
Perimeter
Switch (Optional
accessory)
Separated Zone larger
than 200 m² (2150 ft²)
Main Power
Box & Base
Station
Optional Power Box
& Base Station
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow MS1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow MS1800 in the language / languages: English as an attachment in your email.

The manual is 7,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow MS1800

Robomow MS1800 User Manual - German - 54 pages

Robomow MS1800 User Manual - Dutch - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info