644655
37
Zoom out
Zoom in
Previous page
1/58
Next page
36
Screen Seng Descripon Opons
P003
Near Wire Follow
(Default = ON)
• When Robomow completes its operation, or when the ‘Home’ button
instructs it to Go To Base, it drives itself to the Base Station.
• Robomow drives along the Perimeter Wire with a dynamic offset (not
centered) to prevent wheel tracks along the same path. This return
behavior can be turned off.
• This menu is not available for RC304 and MC400 models.
• For all other models, the Near Wire Follow feature can be enabled
and congured for a Sub-Zone as well.
On/OFF
P004
Max Near Wire
Follow Distance
(Default =
changed based on
the lawn area)
• The maximum distance Robomow will drive from the wire when
returning to the Base Station.
• The distance does not represent actual units of measurement.
• The offset Distance values range from 1 to 12. They represent
different distances from the wire.
• The higher the Distance setting, the smaller the probability of tracks
along the perimeter.
• Perimeter Islands that are relatively close to the Perimeter Wire or
narrow passages may prevent the mower to complete its drive to the
Base Station with ‘Near Wire Follow’ mode. In such cases decrease
the distance to allow the mower to complete the drive to the Base
Station.
• This menu is not available for RC304 and MC400 models.
• For all other models, the Near Wire Follow feature can be enabled
and congured for a Sub-Zone as well.
1-12
P005
Min Near Wire
Follow Distance
(Default = 1)
• The minimum distance Robomow will drive from the wire when
returning to the Base Station.
• The larger the number, the bigger the distance the mower will drive
from the wire while returns to the Base Station.
• This menu is not available for RC304 and MC400 models.
• For all other models, the Near Wire Follow feature can be enabled
and congured for a Sub-Zone as well.
1-5
P006
Near Wire Follow
Test
• Enables to test the mower in the max ‘Near wire Follow Distance’
that is dened in menu P004.
• If the mower is not able to complete the drive in ‘Near Wire’ mode
smoothly, then it is recommended to reduce the max distance set in
menu P004.
• This menu is not available for RC304 and MC400 models.
P007
Rain Sensor
(Default = On)
• The Rain Sensor feature halts operation on rainy or highly humid
weather.
• This is recommended for the health of the lawn. However, mowing
wet grass does not present any technical problem.
Note! It may take a few minutes before Robomow detects rainy or
humid conditions. This is done in order to avoid false-detections. As
soon as the mower detects rain, it halts current mowing operation
and starts searching for the Base Station. When the ‘Islands’ feature
is set to On (see menu P002 above), the mower will execute a special
method of searching for the Base Station. As a result it may take the
mower more time (up to 20-30 minutes) to arrive to the Base Station.
On/OFF
P008
Rain Sensor
Sensitivity
(Default = 25)
• Robomow detects rain when the current reading value is below the
set Sensitivity value and postpones operation.
• The higher the Sensitivity setting, the more sensitive Robomow is to
rain detection.
0-30
P009
Edging On/Off
(Default = ON)
• Edging is a special mode, in which Robomow follows the perimeter
wire for complete and accurate mowing of the lawn edges.
• In lawns where the edge is not maintained well and the mower fails
to complete the drive along the edge of the lawn, it is recommended
to set Edging to ‘Off’.
• Setting Edging to ‘Off’ disables Edging mode in automatic departures
from the station, but still allows edge-mowing when pressing the
‘Edge’ mode button on the operating panel.
On/OFF
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow MC1200 - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow MC1200 - 2016 in the language / languages: English as an attachment in your email.

The manual is 5,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow MC1200 - 2016

Robomow MC1200 - 2016 Quick start guide - English - 4 pages

Robomow MC1200 - 2016 User Manual - German - 62 pages

Robomow MC1200 - 2016 User Manual - Dutch - 62 pages

Robomow MC1200 - 2016 User Manual - French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info