512477
15
Zoom out
Zoom in
Previous page
1/76
Next page
Chapter 1-3
Planning
Determining the distance between adjacent perimeter wires:
1. If lawns are installed by the same perimeter wire that is connected
to the same source (Base Station / Perimeter Switch), then it is
enough to keep a distance of one meter between the wires to prevent
interference in operation.
2. If lawns are installed using different perimeter wires that are not
connected, and each has its own source (Base Station / Perimeter
Switch), then one of the following is required:
a. Maintain a minimum distance between the wires (30-50cm) to
allow overlap between mowing zones, but synchronize between
the mowing schedules to confirm there will not be interference
between the zones. OR
b. Keep two meters between the perimeter wires with no need to
synchronize between the operation schedules.
1.2.3 Will Robomow be driving through a narrow pass in order to
move between two connected zones?
A narrow pass is part of the lawn that connects two larger zones.
The width of this pass determines how it should be set-up.
If the pass… Setup:
Is walled (fence, building, etc)
and width is More than 2.00m (6.6 ft)
OR
Edge of pass is an open area
and width is more than 1.70m (5.6 ft)
Regular setup, as Robomow can
navigate between the areas while
mowing.
(Refer to paragraph 2.1.2).
Is walled (fence, building, etc)
and width is 1.5m – 2.00m (4.9 – 6.6 ft)
OR
Edge of pass is an open area
and width is 1.1m – 1.70m (3.6 – 5.6 ft)
Set as a “Narrow Pass”: Robomow
will drive through the pass, but will
NOT get across while mowing each
area.
(Refer to paragraph 2.2.2).
Is walled (fence, building, etc)
and width is smaller than 1.5m (4.9 ft)
OR
Edge of pass is open area
and width is smaller than 1.1m (3.6 ft)
Pass is too narrow.
Set the areas as 2 separate zones.
We want Robomow to enter the narrow pass in order to move
between these zones.
But, we do not want it to cross the pass while mowing each
one of them.
See Chapter 2, Base Station and Perimeter Wire
Setup
Note: Narrow Passes require special setting of Entry
Points in order to start mowing in the adjacent areas
(see Chapter 7, Setting Robomow and using Advanced Features)
Pass wide enough. Robomow can effectively navigate
between the two areas while mowing the lawn.
Narrow Pass: Robomow will drive
through the pass, but will NOT get
across while mowing each area.
Base Station
Base Zone
Base
Zone
>1.5 m
(4.9 ft)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow City 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow City 120 in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow City 120

Robomow City 120 User Manual - German - 76 pages

Robomow City 120 User Manual - Dutch - 76 pages

Robomow City 120 User Manual - Danish, French, Swedish - 382 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info