490281

Roblin Windy Pro 900 Manual

10
Zoom out
Zoom in
Previous page
1/48
Next page
8
GB
slightly to allow it to clamp around the brackets item 2. Secure the chimney stack to the brackets
using the four self tapping screws provided. Fit the lower chimney section item I by expanding the
chimney slightly to allow it to clamp around the upper chimney section item S, and the bracket on
top of the canopy item C as illustrated in g. 5. Secure the chimney stack to the bracket using the
two self tapping screws provided.
12) Place the 3 metal grease lters as illustrated in g. 11.
• RECIRCULATION
1) Fit the recirculation spigot item R over the round outlet on top of the canopy while pressing down on
the spigot until it snaps into position as illustrated in g. 7.
Note : The two recirculation ducts item G must be tted onto the recirculation spigot R before tting
onto the canopy item C
2) Remove the metal grease lters and place one charcoal lter at a time over the grilles on either side
of the motor housing and turn clockwise into position ( A ) as illsutrated in g. 8.
3) Fit together noise-reduction casings and charcoal lters without the plastic rings on either side of the
motor housing as illustrated in g. 6, operation 2 .
4 OPERATION
A - EXTRACTION OR RECYCLING
Your cooker hood is supplied in the extraction mode. To use the cooker hood in the recirculation mode
re-programme the hood as follows:
Starting in the recirculation mode
Press the ‘+’ button for 10 seconds (while the motor and lights are switched ‘OFF’) and the two LED lights
will ash twice to indicate conrmation that the cooker hood is in the recycling mode.
Reverting to the extraction mode
Press the ‘+’ button for 10 seconds (while the motor and lights are switched ‘OFF’) and the two LED lights
will ash once to indicate conrmation that the cooker hood is in the extraction mode.
B – BASIC INSTRUCTIONS
Lighting
Press Button 1 to switch ‘ON’ the lights.
Motor
Press LED button 2 to switch ‘ON’ the fan motor, the LED F will illuminate to conrm the motor is swit-
ched ‘ON’, and adjust the speed of the fan motor by pressing the Button ‘+’ and ‘-‘. The fan speed will be
increased if constant pressure is kept on the (+) button.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roblin Windy Pro 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roblin Windy Pro 900 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info