Manual Roblin Lido 2 (page 10 of 28) (English, German, Dutch, French, Italian, Spanish)

490305

Zoom out

Zoom in

1/28

IN THE EXTRACTION MODE:

a. Fit the non-return backow aps C over the round outlet item 6 on top of the canopy while pressing

down until they snap into position, and then connect the ducting 150mm (6 INS) and secure the connec-

tions with appropriate clamping rings or adhesive tape (Fig. 8).

b. Before tting the chimney to the canopy make the electrical connection as described in the section

titled ELECTRICAL.

c. Each top and lower chimney stack consists of two sections. Place the top chimney with the slops fac-

ing downwards (Fig. 6c - item 7a) when installing the ducting version and secure the chimney stacks to

the brackets using the M4 screws provided.

d. Check the vertical of the chimney.

e. Place the lower chimney 7b as illustrated in Fig 9 &10.

IN THE RECIRCULATION MODE:

a. Fit the recirculation spigot R onto the chimney bracket using the same xing screws Fig.6a.

b. Connect the ducting 150mm (6 INS) not provided between motors item 6 and the recirculation spigot

and secure the connections with appropriate clamping rings or adhesive tape (Fig. 6c).

c. Make the electrical connection as described in the section titled ELECTRICAL.

d. Each top and lower chimney stack consists of two sections. Place the top chimney with the slops fac-

ing upwards (Fig. 6c - item 7a) when installing the recirculation version and secure the chimney stacks

to the brackets using the M4 screws provided.

e. Check the vertical of the chimney.

f. Place the lower chimney 7b as illustrated in Fig 9 &10.

• FITTING THE CANOPY ONTO THE CHIMNEY

9) Check the connectors of the motor as illustrated in Fig. 11.

10) Test the lights and the fan motor.

11) Remove the metal grease lters. Insert the charcoal lter into the base of the motor housing and

secure the lter with two securing straps A as illustrated Fig. 6d.

12) Fit the metal grease lters.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roblin Lido 2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roblin Lido 2 Manual

Product: