490303
22
Zoom out
Zoom in
Previous page
1/68
Next page
EN
2
2
22
Fitting the Chimney and Fixing the Hood Canopy
Insert the Upper chimney with the slots facing upwards if the
hood is to be installed in the recirculation version, or vice versa
with the slots facing downwards if it is to be installed in the
ducting version, and fix the top part to the Upper Chimney
Connector using the Screws 12c (2.9 x 9.5) provided.
Recirculation version
Make sure that position of the Air Outlet Connector 15 corre-
sponds to the Chimney Grille.
• If this is not the case, remove the chimney and adjust the posi-
tion of the Air Outlet Connector 15; replace the elements as
described above.
Before fixing the Hood Canopy to the Frame:
Open the suction panel by pulling it.
• Unfasten the panel from the hood canopy by sliding the fixing
pin lever provided.
Remove the Grease filters from the Hood Canopy.
Remove any Activated charcoal filters.
Working from below, fix the Hood canopy to the Frame pro-
vided, using the 4 screws 12f provided.
12c
12f
ELECTRICAL CONNECTION
Connect the Hood to the Mains Power Supply, inserting a
bipolar switch with a contact aperture of at least 3 mm.
Open the Suction Panel and the grease filters, make sure that
the power cable is properly inserted into the Suction fan socket
Hook up the Connectors.
From the inside, open the Neon lamp wiring box 24 by unfas-
tening the Screws.
Hook up the remaining free Connector to the one in the Neon
lamp wiring box, then close the cover and fit the box in the lo-
cation provided.
• For the Recirculation Version, fit the Activated Charcoal
Odour Filter.
Replace the Grease Filters and the Suction Panel.
24
12e
Neon
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roblin Ice Cube at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roblin Ice Cube in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info