Manual Roblin Declic 909 (page 9 of 44) (English, German, Dutch, French, Italian, Spanish)

490317

Zoom out

Zoom in

1/44

B -REMOTE INSTALLATION OF THE DECLIC WITH CONFORT PRO OR MISTRAL 800 MOTOR

See the specic instruction booklet supplied when tting the remote controlled Confort or Mistral 800

motorat a distance from the Declic extractor hood.

1.Turn the screws anticlockwise to loosen the 2 xing clips on the Declic (g 1).

2.The Declic is supplied with a 10mm and 20mm spacer to ll the gap between the wall and the rear

ofthe extractor. To t the spacer unscrew the screws located between the halogen lights and remove

thefront light housing in order to access (g.5).

3.Cut the require aperture in the base of the kitchen cabinet as indicated (g. 6).

4.Insert the telescopic extractor in the aperture in the kitchen cabinet and turning the screws clockwis-

esecure the assembly to the kitchen cabinet (g 1).

5.Insert the grommets into the screw holes (g 8).

6.Connect the ducting onto the round outlet on the top of the motor assembly.

7.Connect both appliances together (g 9) and connect them to the mains supply

(See ELECTRICALWIRING chapter).

CAUTION : If the kitchen cabinet does not have a door you must execute points 6 and 7 before-

point 4.

C -REPLACING THE DECORATIVE FRONT STRIP

You can replace the strip in the front trim with a matching strip of kitchen furniture nish or with a com-

pletepiece of cornice.

1.Remove the glass (See chapter 6: MAINTENANCE).

2.When replacing the front strip with matching laminate. Firstly, remove the right-hand end capping

fromthe front trim and slide out the aluminium front strip plate. Secondly, insert the cut piece of

laminateand replace the right-hand end capping.

3.When replacing the whole front trim with a piece of lighting pelmet or similar. Firstly, remove the right-

hand end capping and the aluminium strip to access to the front xing screws. Secondly, cut the

newfront trim in accordance with the dimension contained in g.14 and machine nish the new strip

beforexing the trim and metal plate using the original screws (g.15).

4 OPERATION

Access to the functions by opening of the side.

•Lighting : By rock-switch ON / OFF ( Fig. 16 ).

• Motor : By dimmer switch ( Fig. 17).

Automatic stop of the functions by closing of the side.

5 USEFUL HINTS

• To obtain the best performance we recommend you to switch ‘ON’ the cooker hood a few minutes (in

the boost setting) before you start cooking and you should leave it running for approximately 15 minutes

after nishing.

• IMPORTANT: NEVER DO FLAMBÉ COOKING UNDER THIS COOKER HOOD

• Do not leave frying pans unattended during use as over-heated fat and oil might catch re.

• Do not leave naked ames under this cooker hood.

• Switch ‘OFF’ the electric and gas before removing pots and pans.

• Ensure heating areas on your hotplate are covered with pots and pans when using the hotplate

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roblin Declic 909 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roblin Declic 909 Manual

Product: