490268

Roblin Creatix 800 Manual

20
Zoom out
Zoom in
Previous page
1/56
Next page
EN
2
20
USE
Control panel
Button Function Led
A Turns the Motor off. The Leds indicating the Speed of the motor turn off.
Enables / Disables Keyboard Lock mode if pressed and
held for 5 seconds.
All the Leds light up in cycle.
B Activates speed one. The Leds indicating Speed one and Motor Off turn on.
C Activates speed two. The Leds indicating Speed two and Motor Off turn on.
D Activates speed three. The Leds indicating Speed three and Motor Off turn on.
E Activates Intensive speed. This speed is timed to run for
10 minutes. At the end of this time the system will
automatically return to the speed set before.
It is disabled by pressing the Button or turning the Motor
off.
The Led lights up.
Press and hold the button for approximately 5 seconds,
with all the loads turned off (Motor and Lights), to turn
the Activated Charcoal Filter alarm on.
To turn it off, press and hold the button again for 5
seconds.
Button A Led flashes twice.
Button A Led flashes once.
F Starts the 24H function, in which the motor starts at a
speed that allows suction of 100 m
3
/h for 10 minutes per
hour. This mode cannot be activated if Intensive or Delay
modes are active.
To turn it off, press the button again.
The Leds indicating 24H speed and Motor Off turn on.
When the filters alarm is triggered, the alarm can be reset
by pressing and holding this button for approximately 5
seconds. These indications are only visible when the
motor is turned off.
When the procedure terminates, the indication shown
previously turns off:
24H Flashing
Indicates the need to wash the metal grease filters. The
alarm is triggered after the Hood has been in operation
for 100 working hours.
24H Flashing
Indicates the need to change the activated charcoal
filters, and also to wash the metal grease filters. The
alarm is triggered after the Hood has been in operation
for 200 working hours.
G Activates Delay mode, with automatic shutdown of the
Motor, the Fans and the Lighting with a 30’ delay.
It is disabled by pressing the button or turning the motor
off.
The Delay Led lights up.
Pressing and holding the button for 5 seconds enables the
remote control
Pressing and holding the button for 5 seconds disables the
remote control
Button A Led flashes twice.
Button A Led flashes once.
H Press briefly to turn the lighting system on and off at
maximum intensity.
The Lighting Led lights up.
Press and hold the button for 2 seconds to turn the
Courtesy Lights On (if provided).
A B C D E F G H
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roblin Creatix 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roblin Creatix 800 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info