625583

Robland SD410 Manual

44
Zoom out
Zoom in
Previous page
1/98
Next page
SD410 - S410 V0114 43
NederlandsFrançaisEnglishDeutsch
Normal and prohibited use
The machine was designed to allow the user to perform all normal operations on a planing-
thicknessing machine.
PROHIBITED USES
Insertion cuts on the planer unit i.e. when the workpiece is not worked along its entire length; the use
of other materials than wood.
REMAINING RISKS
Unintentional contact of the hands with the planer arbor..
Kickback of the workpiece.
Tipping over of the workpiece due to insufficiënt support.
Lacerations when handling knives and pieces.
Health by prolonged inhalation of wood dust, mainly of oak, beech and certain exotic woods.
Deafness by prolonged exposure to noise
Acoustic levels
The values given are the emission levels and not necessarily the levels at which the operator can work
safely. Although there is a correlation between the emission values and the level of exposure, it can not
be used reliably to determine whether additional measures should be taken
NOISE INFORMATION
The values given are the emission levels and not necessarily the levels at which the operator can work
safely.
Although there is a correlation between the emission values and the level of exposure, it can not be
used reliably to determine whether additional measures should be taken
Workstation level
continuous
accoust. pressure
according
index A dB (A )
Level accoust. force
dB ( A) ( MW )
Max. accoust value.
Momentary pressure
according to index C
Planing 92 98 (6,3) < 130
Thicknessing 83 97 (5) < 130
The maximum value of 130dB was not exceeded.
DUST MISSION
Measurements according to DIN 933 893 and B. G. requirements for testing of dust emissions from
woodworking machines ( GS -HO - 05 ).
Show the gains obtained that the maximum TRK value of 2mg / m was not exceeded. See the local
regulations on occupational safety.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland SD410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland SD410 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info