625584
48
Zoom out
Zoom in
Previous page
1/98
Next page
SD410 - S410 V0114 47
NederlandsFrançaisEnglishDeutsch
Starting up the machine SD410
(Fig 2)
Turn the main switch Q1 (1) to position “ 1” in order to put the machine under tension.
The motor for the planer arbor can be started by pressing the start button. (1) The engine starts
automatically in “star - triangle.
By pressing the start button (2) the feeding motor starts.
In the comfort pack, the feeding speeds can be selected with the switch (3) there is a choise between
two speeds, pos = 1 6m/min - pos 2 = 12m/min.
To stop the feeding motor, press the stop button (5).
All engines are switched off when the stop button or emergency button (6) are pressed.
There is an emergency stop button on the infeed side of the machine.
It is not possible to start the machine with opened planer table and the guard in planing position the
machine. The guard must be put in thicknessing position before the machine can be started.
23
4 5
6
1
Fig.2
Aspiration (Fig 3)
For your health and that of your employees, it is recommended to connect to an exhaust system to the
machine.
The machine is equipped with a suction port of 120 mm diameter.
The ow rate must be at least 20 m/sec measured at the machine. The total air ow must be at least
1500 m³/h.
Fig.3
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland S410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland S410 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info