625584

Robland S410 Manual

43
Zoom out
Zoom in
Previous page
1/98
Next page
42 V0114 SD410 - S410
Nederlands Français English Deutsch
Operating instructions
The following recommendations for safe working procedures are given as an example, on top of all the
information specic to this machine and necessary for the safe use as an example.
When working with the machine, safety equipment must be used.
The user must follow the operator instructions in order to avoid accidents.
TRAINING OF MACHINE OPERATORS
It is essential that the operators of the machine receives thourough training regarding operating and
adjusting of the machine
In particular:
the risks involved in working with the machine.
the operating principles, the proper use and setting of the machine.
the correct selection of the tool for each operation.
the safe handling of the parts to be processed.
to the position of the hands in relating to the cutting tools.
Storing the workpieces before and after machining them.
STABILITY
In order to be able to use the machine safely, it is essential to place it stable on the oor.
ADJUSTMENT AND INSTALLATION OF THE MACHINE
Before adjusting the machine, it must be disconnected from the mains.
When installing and adjusting the tools the recommendations of the manufacturer should be followed.
The tool must be properly sharpened and installed.
HANDLING OF TOOLS
When handling the knives, one should always wear protective gloves to avoid severe cuts.
Even blunt tools can cause serious injuries to your hands.
INTENDED USE OF THE MACHINE
The machine may only be used for the processing of wood.
SETTING THE PLANING GUIDE
The guide must always be used for planing and squaring to ensure proper and safe guidance of the
workpiece
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland S410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland S410 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info