625587
11
Zoom out
Zoom in
Previous page
1/15
Next page
afapmx-E.N.F9304.doc
NOTE:
GEAR-SPEED-CONTROL LEVER
(D) will not operate unless the
motor is running position.
NOTE:
The ―ACCU-RATE KNOB" (E)
cannot be rotated when motor is on
―OFF‖ position.
NOTE:
If your GEARS come with a HUB,
make sure it FACES the SHAFT
avoiding damages to the chain
drive. (FIG. 17)
NOTE:
To enlarge your available speed
range on feeder, extra set of gear is
available at your dealer. [XG-2+4
for Light-duties (Model: 32 4 + 2
= 6) & XG-4+4 for Heavy-duties
(Models: 34/44 4 + 4 = 8)]
C) A gear arrangement and feed
rate chart is attached to the
INSIDE of GEARBOX- COVER.
(Ref. FIG. 16-1, 16-2 & 16-3.)
D) To remove GEARBOX-COVER,
remove two KNOBS. (FIG. 18)
E) To remove & rearrange GEARS,
remove HEX-NUTS. (FIG. 19)
NOOT:
HEFBOOM VOOR de CONTROLE van de
VERSNELLING (D) Werkt niet als de machine
niet in de actieve stand staat.
NOOT:
De ―VERSNELLING-ACCU-KNOP" On mag
niet draaien als de motor in de ―OFF-positie
staat.
NOOT:
Als uw versnellingsbak met een CENTRE is,
wees er zeker van dat die KIJKT naar de AS,
dit vermijdt beschadigingen aan de aandrijving
van de ketting. (FIG. 17)
NOOT:
Om het aantal beschikbare versnellingen te
verdubbelen model 4-snelheden l (4 x 2 = 8),
een set extra snelheden [XG-2+4 voor de
lichtere modellen (Model: 32) & XG-4+4 voor
de modellen zwaars (Modellen: 34/44)] is
beschikbare bij uw handelaar.
C) EEN AANPASSING VAN DE
VERSNELLING en een tekening met de
aanvoersnelheid vastgemaakt aan DE
BUITENKANT van de VERSNELLINGSBAK
(Ref. FIG. 16-1, 16-2 & 16-3.)
D) Om de AFDEKKING van de
VERSNELLINGSBAK af te nemen,
verwijder de twee KNOPPENS. (FIG. 18)
E) Om de VERSNELLINGEN opnieuw te
verstellen, verwijder BOUT HEX. (FIG. 19)
NOTE:
(D) Le levier de contrôle de la vitesse
d'engrenage ne fonctionne pas tant que le
moteur n'est pas en fonction.
NOTE:
Le ―BOUTON ACCU-VITESSE (E) " Ne
peut être tourné quand le moteur est en
position.
NOTE:
Si votre engrenage est muni d'un moyeu,
assurez-vous qu'il soit face à l'arbre pour
éviter des dommages à la chaîne motrice.
(FIG. 17)
NOTE:
Pour doubler les vitesses disponibles sur
votre modèle, un jeu supplémentaire de
vitesse est disponible chez votre
marchand. [XG-2+4 Jeu Light-duties
(Modèle: 32 4+2=6) & XG-4+4 Jeu
Heavy-duties (Modèle: 34/44 4+4=8)]
C) Un tableau sur les positions
d'engrenage et les vitesses
d'entraînement est disponible dans le
couvercle de la boîte d'engrenage.
(Ref. FIG. 16-1, 16-2 & 16-3.)
D) Pour enlever le couvercle, retirez les
deux boutons. (FIG. 18)
E) Pour retirer et ajuster les engrenages,
dévissez les écrous Hex. (FIG. 19)
GB
N
F
FIG. 18
FIG. 16-3
FIG. 16-1
FIG. 16-2
FIG. 15
(A)
(B)
(C)
(D)
(E)
Switches
Gear Hub
FIG. 17
FIG. 19
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland RAV 32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland RAV 32 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info