625578
27
Zoom out
Zoom in
Previous page
1/82
Next page
English Deutsch
26 V1110 NZ3200 - AXIS ERGO
Manual Axis-Ergo
REFERENCES AND POSITIONING
Start Screen: here you can nd
the software data.
Numerical screen: by pressing
the eld under ‘desired
position, this screen will
appear. Here you can enter
the desired position till 1/10
of a mm. Conrm the desired
position with enter (see arrow).
To reach the desired position in
the safety zone, you’ll have to
press continuously the warning
triangle to move the guide in
the safety zone and arrive at
the desired position.
Screen for Initializing : by
pressing start you can continue
in this programm. The guide is
going to search and establish
its reference. Be sure the table
is free of all objects.
After the conrmation in the
numerical screen, you should
conrm once more with the
START button, to be sure of the
position you’ve entered.
There is as well a park position
congured in the software,
with the value of 1527. You can
reach this position by pressing
the ROBLAND LOGO. Same
remark: when you reach the
safety zone, you’ll have to
press the warning triangle
continuously till the guide has
left this zone.
Main screen: while searching
the reference, you can see
‘searching for reference.
When this text is gone, you
will be able to move the guide
between 3 and 1527 mm.
These measurements are as
wel the limits of this software.
When the entered value
<150mm youre entering the
safety zone where a warning
triangle will be displayed and
the movement will stop.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland NZ3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland NZ3200 in the language / languages: English, German as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland NZ3200

Robland NZ3200 User Manual - Dutch, French - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info