Manual Robland NZ Axis Ergo (page 15 of 82) (English, German)

625579

Zoom out

Zoom in

1/82

– English – Deutsch

14 V1110 NZ3200 - AXIS ERGO

1. The scorer sawblade is below level and does not work properly. There will be chipping on the

interior side.

2. The scorer sawblade is to far up, there will not be chipping but 2 excessive grooves.

3. The scorer sawblade is not aligned properly to the main sawblade. There will be a border on one

side and a waste on the other.

4. Correct setting of the scorer saw

It would be good to t the height of the blade only at a height necessary for an incision that would

cross exactly the laminated layer or overlay.

In case of extended softwood processing without use of the scorer sawblade, it is recommended to

remove the blade to avoid damage and dust projected by the main sawblade.

Blocking the sliding table (Fig.14)

- The sliding table can be blocked in two positions and with one block-system. This is vital for

example by loading of the boards or cutting along the parallel guide. The system is located on the

front-side of the sliding table. Pull the button (1) in your direction and turn to the right to liberate the

table. Pull the sliding table till end, the table will be blocked automatically when arriving in the exact

position. Continue this way to start working.

- When several movements are repeated consecutively,

it is possible that the bearing cage between the two

proles moves a little bit. We can note this as well by

a reducing travelling distance of the sliding table. To

proceed and achieve the normal travelling distance

of the sliding table, you can adapt the position of the

bearing cage: simply push the table with a few short,

light pushes against the buffer stop at the end of the

sliding table until the position of the ball carrier is

adjusted and the table can be moved again along its full

stroke.

Attention: cleaning and maintenance of the sliding table

It is vital to regularly blow away the saw- and other dust,

collected between the sliding table and the bearing

cage. Push the sliding table to the end, to get a better

reach towards the rails, the bearing cage and gliding

tracks. Oil serves to lubricate the sliding rails and is an

extra guarantee of good use and function.

Fig.14

Fig.15 Fig.16

Not good

Good

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robland NZ Axis Ergo in the language / languages: English, German as an attachment in your email.

The manual is 6,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland NZ Axis Ergo

Robland NZ Axis Ergo User Manual - Dutch, French - 86 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robland NZ Axis Ergo Manual

Product: