625559
41
Zoom out
Zoom in
Previous page
1/46
Next page
40 V0913 NX SERIES
English
Planer belt tension:
Remove both cover plates of the thicknesser at both front and back side of the frame in order to get
access to the planer motor drive belts by lifting them up and taking them out. The drive belts for the
planer motor can easily be tightened by loosening the 4 nuts (1) holding the motor to the frame (g 35.)
The motor, under its own weight will lower and tighten the belts (belt type: SPZ 1400 (Robland n°
NSPZ1400).
Fig.35
Saw belt tension:
Tensioning the belts is done simply by loosening the bolts that holds the motor to the saw unit frame,
the motor, again under its own weight will tighten the belts (g. 36).
Belt type: for 250 mm dia. saw blade with or without scoring unit: SPZ545 (Robland n° NSPZ545).
For machines without scoring unit and 300 mm dia. saw blade: SPZ569 (Robland n° NSPZ569).
Fig.36
Changing and tension of the belts of
the 4-speed spindle (g. 37)
The machine is equipped with a 4 speeds spindle with a read out on the inner side of the machine,
which allows the user to read out the speed of the spindle when starting up. Before loosening the belt
to change the speed, loosen the belt spanner handle,then put the belt in the corresponding grooves to
the chosen speed. Fasten the handle and check the tension of the belt, you can push the belt between
the 2 pulleys, if the belt gives way approximately 5 or 6 mm, then the tension on the belt is right.
Replace the belt by a Robland belt type: SPZ-700 (9,5 x 700) number N8224.
1
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland NXTZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland NXTZ in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland NXTZ

Robland NXTZ User Manual - German - 100 pages

Robland NXTZ User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info