625559
35
Zoom out
Zoom in
Previous page
1/46
Next page
34 V0913 NX SERIES
English
straight part of the template. The cutting depth is progressive; with a maximum on the index of the
template (hat index is visible through the horizontal pusher. The wood guide, connected to the fence,
replaces the template when calibrating with a bearing. The operator is obliged to use this guide which
is delivered with the fence. It is thus advisable to adjust the wood pusher height using as a guide and
to put it as far to the front as possible.
Tenoning guard option A4375
and tenoning table option A4276 (g.23)
1 For tenoning, a special guard is mounted on the table.
2 This guard allows tools up to 250 mm diameter.
3 The hood (1) is fixed to the table with two 2 clamp screws (1)
4 The front cover plate (3) is adjustable in height with 2 knobs (2) at the top of the hood.
5 When tools up to 220 or 250 mm diameter are used, the speed of the spindle arbour has to be
3000 T/min.
Fig.23
Thicknesser - planer - mortiser
Warning
1 Always make sure there is no tool left in the mortising chuck before starting up the planer-
thicknesser.
2 Check very carefully whether the planer knives are well positioned and fastened. If this is not the
case, they will come off when the machine is started and this could lead to serious injuries for the
operator and damage the machine.
Changing and setting of the planer knives (g. 24)
1 Unlock the bolts (1) in the jib strip and remove the planer knives
2 Remove the 3 jib strips and clean the grooves inside the planer arbor. Make sure the little springs
(2) underneath the knives do not stay blocked inside their seats in the arbor
3 Never use planer knives which have less than 20 mm height
4 Put the cleaned planer knife (3) into the groove with the adjustment gauge (X428)
5 Tighten the bolts from the middle of the arbour to the outside
6 Do a trial run of the machine and then tighten the knives again.
tenoning table
Option A4376
1
3
2
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland NXTZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland NXTZ in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland NXTZ

Robland NXTZ User Manual - German - 100 pages

Robland NXTZ User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info