625559
10
Zoom out
Zoom in
Previous page
1/46
Next page
NX SERIES V0913 9
English
MORTISER
The mortiser unit is composed of the removable support and the chuck mounted on the planer arbor. It
is designed to work wood; the use of all other materials is prohibited.
mortising holes in all wood types with or without depth stop;
mortising slots in solid wood;
boring out knot holes
PROHIBITED USE
The following tasks are prohibited on the mortising unit;
milling or tenoning with tools that do not have this purpose
grinding metal parts e.g. planer knives.
REMAINGING RISKS
The main sources of danger on a mortiser unit are:
unintentional contact of hands or other parts of the body with the rotating tool;
tipping of the work piece due to insufficient support;
contact with the planer arbor as it rotates.
Despite the use of specic protection devices and the application of the hygiene and safety
instructions, some risks remain when working with the mortiser:
Risk of accidents in the insecure area of the tools
Risk of wounding while replacing tools (cuts through contact with the knives)
Crushing of the ngers
Risk of jamming of the hand in the machine, when using a removable pusher
Risk of back kicked pieces of wood
Health risks through prolonged inhalation of particles, especially oak, beech or other exotic sorts of
wood
Deafness through prolonged exposition to noise
TYPES OF TOOLS
Cutter blocks and the tool holders with interchangeable knives are frequently used when moulding.
The cutter blocks can be made in 1 piece, the cutting part being tted in a body of hard steel, mostly
chromium steel. The tool holders consist of the part on which the knives are tted mechanically. Their
cutting part is made out of hard metal (HSS) or calcium-carbide (K), as is the case for the cutter blocks.
Circular saw
The use of saw blades in hard metal (HSS) is strictly forbidden. Always use carbide-tipped (K) saw
blades.
Planer-thicknesser
The most frequently used planer knives are carbide (K) or hard metal blades (HSS).
Mortiser
Only use “left” drills on the mortiser. To avoid vibrations short drills should be used as often as possible.
IMPORTANT:
for each tool and for each diameter, the correct speed must be chosen.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland NXTZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland NXTZ in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland NXTZ

Robland NXTZ User Manual - German - 100 pages

Robland NXTZ User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info