625559
5
Zoom out
Zoom in
Previous page
1/46
Next page
4 V0913 NX SERIES
English
Operating instructions
The following recommendations for safe working methods are given as examples, additional to the
information on the machine characteristics.
When working with the spindle fence or the spindle, between 2 xed stops and when tenoning,
safety equipment must be used.
Nevertheless, the user must also follow the operating instructions in order to avoid accidents.
1 Training of machine users.
It is absolutely necessary that the spindle-moulder user receives comprehensive training regarding
operating and adjusting the machine. In particular:
a) the risks involved in working with the machine;
b) the operating principles, the correct usage and adjustment of the machine;
c) the correct choice of the tools for each operation;
d) the safe handling of parts to be machined;
e) the position of the hands in relation to the cutter block;
2 Stability.
In order to be able to use the machine in a safe way, it’s necessary to place it in a stable position on
the ground or another stable surface.
3 Adjustment and installation.
a) Disconnect the machine from its power supply before every adjustment.
b) The recommendations of the manufacturer must be followed when adjusting an installing the
tools.
c) The tools must be suited to the material which has to be worked in order to assure a safe and
efficient usage. The tools must be correctly sharpened and installed with tool holders that are
carefully balanced.
4 Handling of tools.
In order to avoid severe cuts, safety measures must be taken when handling tools.
5 Installing tools
Special equipment, such as tool setting gauges, must be only used when the machine is not operating.
Table insert rings must be used in order to reduce to a minimum space between the table and the
spindle shaft.
6 Adjustment of the fences
a) Working with the spindle fence requires special attention:
b) A false or integrated fence should be used to minimise the opening between the tools and the
fences.
c) A push stick should be used as often as possible
d) A wood pusher should be used, together with protection, to push the piece manually
e) Long pieces need to be supported with roller supports.
7 Rotation direction and choice of speeds
It is very important that the chosen tool turns in the right direction. When the piece is presented, the
operator must take care that the work piece is fed in the correct direction and the correct speed has
been chosen. The speed must also be suited to the tool on the machine.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland NXTZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland NXTZ in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland NXTZ

Robland NXTZ User Manual - German - 100 pages

Robland NXTZ User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info