625546
35
Zoom out
Zoom in
Previous page
1/98
Next page
34 V0212 HX SERIES
English
Deutsch
Fig.36
The spindle belts can be tensioned, or changed, simply by loosening the 2 bolts holding the motor
support plate to the spindle column (1).
Pull the motor towards you for tensioning the belts.
For replacing them, the motor must be taken-off of the column.
The drive chain for the feeding system on the thicknesser can very easily be lubricated by opening
the planer in feed table. Now the drive chain can be seen right next to the planer table locking bolt.
The little cover plate X0164 can be removed by removing the table locking bolt. When however the
chain has to be replaced, then the complete saw spindle table has to be taken off to reach this chain.
Fig.37
1
1
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland HX310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland HX310 in the language / languages: English, German as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland HX310

Robland HX310 User Manual - Dutch - 48 pages

Robland HX310 User Manual - Dutch, French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info