Manual Robland HX310 (page 20 of 98) (English, German)

625546

Zoom out

Zoom in

1/98

HX SERIES V0212 19

– English – Deutsch

Saw guide (g. 10)

1 The saw guide is mounted on the cross-cut fence by means of 2 quick release handles (3).

2 This saw guide can be moved along the scale bar and can be secured by pushing the locking

handle (2) down.

3 The saw guide has T-grooves on 2 sides, which allows a high or low position.

4 Adjust the height of the saw blade, in accordance with the thickness of the piece.

5 If possible, mount the guide, according to the height of the piece, vertically or horizontally and

pull it back to the height of the riving knife.

6 Lock the guide with the handles (3)

7 The wanted cut can be read of the scale bar

8 For small cuts and cuts with tilted saw blade, the saw guide can be tilted to the low position thus

avoiding sawing the saw guide, when making thin cuts.

WARNING:

for narrow cuts along the saw fence always use a push stick!

Fig.10

Sliding table (g. 11)

The machine is delivered with the sliding table mounted onto it. For a good adjustment and functioning

of the sliding table, it is necessary that the machine is evenly placed in both directions by means of a

level. All adjustments and adaptations of the sliding table have been made by the factory.

To create a smooth movement of the wood or the panel, the sliding table is set at +/- 0.2 mm above de

cast iron saw table.

The sliding table can be locked in one position along the whole length. This is necessary when, for

example, sawing lengthways with the parallel fence.

The bolt is situated on the side of the sliding table (g. 11.1). Pull the bolt forward and click it in the

opening at the side of the sliding table. To unlock it, pull the bolt backwards and turn it 180°. Two

rubber stops on the lower beam of the sliding table stop the course of the sliding table. When multiple

movements back and forwards are repeated, it is possible that the ball bearing moves slightly. This will

cause some resistance when pushing the sliding table.

This can also occur if the total course of the sliding table is shortened. With a few short pushes, with

the purpose of reaching the end of the course, the position of the ball bearing can be improved.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robland HX310 in the language / languages: English, German as an attachment in your email.

The manual is 5,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland HX310

Robland HX310 User Manual - Dutch - 48 pages

Robland HX310 User Manual - Dutch, French - 102 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robland HX310 Manual

Product: