625546
9
Zoom out
Zoom in
Previous page
1/98
Next page
8 V0212 HX SERIES
English
Deutsch
Always use appropriate protection devices and always observe the specic regulations for accident
prevention.
Despite the use of specic protection devices and the application of the hygiene and safety
instructions, some risks remain when working with the moulder-shaper:
Risk of accidents in the insecure area of the tools
Risk of wounding while replacing tools
Risk of wounding by the piece of wood itself, or by wood shavings
Crushing of the ngers
Risk of jamming of the hand in the machine, when using a removable pusher
Risk of back kicked pieces of wood
Health risks through prolonged inhalation of particles, especially oak, beech or other exotic sorts of
wood
Deafness through prolonged exposition to noise
PLANER-THICKNESSER
The planer-thicknesser is designed for the following processes, and is equipped with protection devices
and can only be used to work wood. All working processes that do not comply with these instructions
are therefore prohibited.
Planing the wide surface of the work pieces on the planer unit;
Planing the narrow side of the work piece on the planer unit;
Bevelling an edge on work pieces on the planer unit;
PROHIBITED USE
The following tasks are prohibited on the planer-thicknesser unit:
down cut planing i.e. when the feeding direction and the planer’s arbour rotation and direction are
the same and the outfeed planer table is set lower than the infeed table;
insertion cuts on the planer unit i.e. when the work piece is not worked along its entire length;
REMAINING RISKS
The most common danger areas on the planer-thicknesser unit are:
the working area;
the rotating tool, e.g. contact with the blades, getting caught in the rotating planer arbor, ejection of
work parts, knots, etc;
the work piece kickback area.
Despite the use of specic protection devices and the application of the hygiene and safety
instructions, some risks remain when working with the planer-thicknesser:
Risk of accidents in the insecure area of the tools
Risk of wounding while replacing tools
Risk of wounding by the piece of wood itself, or by wood shavings
Crushing of the ngers
Risk of jamming of the hand in the machine, when using a removable pusher
Risk of backkicking
Health risks through prolonged inhalation of particles, especially oak, beech or other exotic sorts of
wood
Deafness through prolonged exposition to noise
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland HX310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland HX310 in the language / languages: English, German as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland HX310

Robland HX310 User Manual - Dutch - 48 pages

Robland HX310 User Manual - Dutch, French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info