625545
30
Zoom out
Zoom in
Previous page
1/98
Next page
HX SERIES V0212 29
English Deutsch
Fig.25
Planer fence (g. 26,27)
1 The planer can be adjusted according to the width of the work piece after unlocking the handle
(1)
2 After unlocking the clamping handle (2) the fence can be set at 45° and 90°.
The adjustment screw for position 90° is at the bottom of the clamping plate.
The adjustment screw for position 45° is at the upper side of the clamping plate.
Fig.26
Planer protection (g. 27, 28 en 29)
The planer protection is composed of an aluminium protection bridge which can be adjusted in height
parallel to the planer arbor and tables at 100 mm maximum. For surface planing the bridge (1) has
to be lowered by means of the adjustment knob (g. 28.1). This position is not inexible. Thanks to
the atted, bulged shape of the bridge, the work piece can be pushed over the planer in one uent
movement. That way, tracks of retaking are avoided. Move the bridge sideways by loosening the knob
(g. 28.1
This protection has to be set in place for every operation on the planer.
Set the height with the adjustment knob, the work piece is guided along the planer fence. First check
the work piece for straightness and always put the work piece with the concave down. Then set the
chip thickness by adjusting the in feed table. For planing the narrow side of a work piece the protection
3
1
2
1
3
2
1
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland HX260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland HX260 in the language / languages: English, German as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland HX260

Robland HX260 User Manual - Dutch, French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info