625585

Robland D510 Manual

42
Zoom out
Zoom in
Previous page
1/82
Next page
V0214 D 510 41
NederlandsFrançaisEnglishDeutsch
Accoustic and dust emission levels
The values given are the emission levels; these are not necessary the levels at which
the operator can work safely.
Alhough there is a link between the emission values and the exposion level, it cannot
be used in a reliable way to determine if supplementary measures should be taken.
NOISE INFORMATION
Measurements as per ISO Norm 7960; Annexe D
Workpost under load
Level continuous
pressure as per index
A
Level accoustic power
Max. value
accoustic pressure
as per index C
Thicknessing 83 97(5) < 130
De hoogst toegelaten waarde van 130 dB werd in geen geval overschreden.
Normal and prohibited use
The table saw is designed for the following work and is equiped with protective devices for these pro-
cesses only. It is not designed to work materials such as ferrous and non-ferrous metals, work different
from that stated below is prohibited.
NORMAL USE
- Ripping with the parallel saw fence with, or without the sawblade tilted and the fence in
- the upright or low position;
- Right-angled or mitre cuts with the 90° fence mounted to the sliding table with tilted or
- upright sawblade;
- Cross cutting workpieces using the adjustable stop on the 90° fence;
- Cutting panels or solid wood on the sliding table
PROHIBITED USE
Following tasks are prohibited on the table saw:
- Submerged cuts by removing the riving knife, and saw guard;
- All types of cuts without using the table saw fence, the 90° fence or sliding table;
- Cutting large workpieces that exeed the machine capacity without using aids such as roller supports
or table extensions;
REMAINING RISKS
Main risks on the table saw are:
- Unintentional contact of the hand with the running sawblade;
- Workpiece kickback;
- Tipping over of the workpiece due to insufficient support;
NOISE REDUCTION
The type and condition of the sawblade is important in keeping the nois level as low as possible.
The material and the position of the safety devices are important in reducing the noise level.
Using the correct speed of the sawblade for the type of material will reduce the noise level as well;
The above does not negate the fact that extra safety equipment such as ear protection must be used.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland D510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland D510 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info