748004
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
ATS Autostart Funktion
Wird am Start mit Vollgas beschleunigt, so drehen je nach Bodenhaftung bloß die
Reifen durch. Mit der Autostart-Funktion muss nur ein wenig Gas gegeben werden,
und es wird eine zuvor eingestellte Gasposition (mit der effektives Beschleunigen
gerade noch möglich ist) vorgegeben.
Die Autostart-Funktion muss vor jedem Start aktiviert werden.
Sie funktioniert nur beim ersten Betätigen des Gashebels. Sobald der
Gashebel wieder leicht losgelassen wird, wird sie deaktiviert.
1. Drücken Sie Enter und wählen Sie im Hauptmenü mit den +/- Tasten den
Menüpunkt „ATS“ und bestätigen Sie mit Enter.
2. Drücken Sie ENTER, um den Menüpunkt TRI (Gashebelstellung) zu wählen. Mit
den +/- Tasten können Sie den Wert im Bereich -100%~100% einstellen.
3. Drücken Sie ENTER, um den Menüpunkt POS (voreingestellte Gasposition) zu
wählen. Mit den +/- Tasten können Sie den Wert im Bereich 0%~100% einstellen.
4. Drücken Sie ENTER, um den Menüpunkt DLY (Verzögerung) zu wählen. Mit den
+/- Tasten können Sie den Wert im Bereich 0~100 einstellen.
5. Drücken Sie ENTER, um den Menüpunkt MOD zu wählen. Mit den +/- Tasten
wählen sie zwischen INH (ATS inaktiv) und RDY (ATS aktiv).
6. Drücken Sie 2x EXIT, um die Einstellungen zu speichern und zum Hauptmenü zu
gelangen. Erneutes Drücken von EXIT bringt Sie zum Statusdisplay.
2.14 BR_MIX
BR_MIX - Bremsmischer
Der Bremsmischer wird verwendet, wenn neben dem Gasservo noch ein
weiteres Servo zum Bremsen verwendet wird.
Der Mischer verwendet die Position des 2. (Gas/Bremse)Kanals, um die
Servoposition für den 3. Kanal zu bestimmen. So kann die Bremsbalance
zwischen Vorder- und Hinterachse eingestellt, und mit den Funktionen TH
TRIM und TH EPA weiter feinjustiert werden.
1. Drücken Sie Enter und wählen Sie im Hauptmenü mit den +/- Tasten den
Menüpunkt „BR_MIX“ und bestätigen Sie mit Enter.
2. Drücken Sie ENTER um RATE auszuwählen.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robitronic TL-3C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robitronic TL-3C in the language / languages: German as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info