Manual Robin America RGV12000 (page 40 of 47) (English)

599739

Zoom out

Zoom in

1/47

1. FRONT COVER

Attach the front cover to the engine main

bearing cover. Match the faucet joint and

tighten the bolts.

Tightening torque

120-14Okg

-cm

11.8-13.7 N

.rn

(8.7-10-l ft -Ibs)

2. ROTOR

(1)

Wipe off oil, grease and dust from the

tapered portion of engine shaft and

matching tapered hole of rotor shaft.

(2) Mount the rotor to the engine shaft.

Tighten the through bolt.

Apply a wrench on the through bolt and

hit wrench handle clockwise with

ham-

mer to tighten.

If an impact wrench is available, use it.

Tightening torque

230-250kg-cm

22.5-24.5 N -m

(16.6-19.5 ft-lbs)

3 STATOR

(1)

Put the stator in the rear cover setting the

four grooves on the side of stator with

thread holes of the rear cover.

Tighten the four bolts tentatively to check

if the grooves and thread holes are

aligned correctly.

NOTE : Be careful not to give cuts to wires when

pulling them out from the rear cover.

(2) Remove the four bolts.

FRONT COVER

B6LT

STATOR COVER

- 37-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robin America RGV12000 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robin America RGV12000 Manual

Product: