8-11 DIODE UNIT (RGV13000T only)
Check the resistance between five wires of
DIODE UNIT with circuit tester.
Diode unit
needle of the cir-
cuit breaker
9. DISASSEMBLY AND ASSEMBLY
9-1 PREPARATION and PRECAUTIONS
1) Be sure to memorize the location of individual parts when disassembling the generator so
that the generator can be reassembled correctly. Tag the disassembled part with the neces-
sary information to facilitate easier and smoother reassemble.
2) For more convenience, divide the parts into several groups and store them in boxes.
3) To prevent bolts and nuts from being misplaced or installed incorrectly, replace them tem-
porarily to their original position.
4) Handle disassembled parts with care; clean them before reassemble using a neutral clean-
ing fluid.
5) Use all disassembly / assembly tools properly, and use the proper tool for each specific job.
9-2 COMPONENT PARTS
For disassembling and assembling, the following illustrations show the major component parts
and their configuration for (1) Generator assembly, (2) Control Box and (3) Fuel Tank and sys-
tem.
The specified tightening torque is indicated in the illustration.
-32-
