Manual Roberts Radio ChronoDAB (page 13 of 32) (English)

612998

Zoom out

Zoom in

1/32

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Operating your radio - FM auto-tune

1. Fully extend the wire aerial located on the rear of your clock radio.

Place the wire antenna so that it is as straight as possible extending

either above or below the clock radio.

2. Press the On / Standby button to switch on your clock radio.

3. Press and release the Mode button until the FM band is selected.

4. Press and hold down the Tuning Up button for 2 - 3 seconds to cause

your radio to search from low frequency to high frequency and to stop

automatically when it ﬁ nds a station of sufﬁ cient strength.

5. After a few seconds the display will update. The display will show the

frequency of the signal found. If the signal is strong enough and there

is RDS data present then the radio may display the station name.

6. To ﬁ nd other stations press and hold the Tuning Up button as before.

7. Press and hold down the Tuning Down button for 2 - 3 seconds to

cause your radio to search from high frequency to low frequency and

to stop automatically when it ﬁ nds a station of sufﬁ cient strength.

8. When the end of the waveband is reached your radio will recommence

tuning from the opposite end of the waveband.

9. Adjust the Volume to the required setting.

10. To switch off your clock radio, press the On / Standby button.

Standby

2,10

4,6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roberts Radio ChronoDAB in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roberts Radio ChronoDAB Manual

Product: