612992

Roberts Radio Blutune 200 Manual

61
Zoom out
Zoom in
Previous page
1/64
Next page
The Company reserves the right to amend the specifi cation without notice.
Specifi cations
Power Requirements
Mains 100-240V ~ 50/60Hz (32W max)
Battery (Remote control) 1 x CR2032
Frequency Coverage
FM 87.5-108MHz
DAB 174.928 - 239.200MHz
Circuit features
Output Power 2 x 8 watts
Headphone socket 3.5mm dia
Auxiliary in socket 3.5mm dia
Aerial System FM Telescopic aerial
DAB Telescopic aerial
Cautions
Do not allow this sound system to be exposed to water, steam or sand.
Do not leave your sound system where excessive heat could cause
damage.
It is recommended that the DAB band is used for radio listening where
possible since this may result in better sound quality and freedom from
interference than will often be obtained on the FM band.
The name plate is located on the rear of your sound system.
• The sound system shall not be exposed to dripping or splashing and
that no objects fi lled with liquids, such as vases, shall be placed on
the sound system.
• It is recommended to operate the product such that there is a minimum
distance (10cm recommended) to adjacent objects in order to ensure
good ventilation.
• The ventilation of the product should not be restricted by covering it or
its ventilation openings with items such as newspapers, tablecloths,
curtains etc.
• No naked fl ame sources such as lighted candles should be placed on
the product.
• It is recommended to avoid using or storing the product at extremes
of temperature. Avoid leaving the unit in cars, on window sills, in direct
sunlight etc.
60
Information
… 61 …


Need help? Post your question in this forum.

Forumrules
1

Forum

roberts-radio-blutune-200

Reset search

  • I am unable to play cd's. The reading message is flashing but doesn't go any further Submitted on 13-12-2022 at 14:24

    Reply Report abuse

  • I am unable to play CD's. The reading message is on flashing but doesn't go any further Submitted on 13-12-2022 at 14:22

    Reply Report abuse

  • I have a Roberts Blutune sound system which has not been greatly used however it has now decided not to perform a number of functions, firstly it will not automatically set the time further to this it will not load any radio channels. I have tried a system reset with no success can you suggest a solution.
    Regards Michael Davies Submitted on 11-8-2022 at 19:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roberts Radio Blutune 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roberts Radio Blutune 200 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roberts Radio Blutune 200

Roberts Radio Blutune 200 User Manual - German - 64 pages

Roberts Radio Blutune 200 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info