612992
22
Zoom out
Zoom in
Previous page
1/64
Next page
21
Scan sensitivity setting - FM
Your sound system will normally scan for FM broadcasts which are strong
enough to give good reception. However, you may wish the Auto-scan
function to also be able to nd weaker signals, possibly from more distant
radio transmitters. Your radio includes a local / distant option for the Auto-
scan function.
1. Press and release the On / Standby button to switch on your sound
system.
2. If needed, press and release the Mode button until the FM band is
selected.
3. Press and hold the Menu button. 'FM Menu' will appear on the display.
Press and release the Select button to enter the FM menu.
4. Press the Tuning Up or Down buttons until 'Scan setting' shows on
the display. Press and release the Select button to enter the scan
sensitivity adjustment mode.
5. Press the Tuning Up or Down buttons to switch between Local ('Strong
stations only') and Distant ('All stations') options on the lower line of the
display. The Distant option will allow the radio to nd weaker signals
when scanning.
6. Press and release the Select button to con rm your selection. The
Local or Distant setting is stored in the radio and remains in force until
changed or until a System Reset.
Note: The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.
3
4,5
4,5
3-6
2
FM Menu
<
>
FM
Scan setting
<
>
Scan setting
Strong station
<
>
*
Scan setting
All stations
<
>
*
22


Need help? Post your question in this forum.

Forumrules
1

Forum

roberts-radio-blutune-200

Reset search

  • I am unable to play cd's. The reading message is flashing but doesn't go any further Submitted on 13-12-2022 at 14:24

    Reply Report abuse
  • I am unable to play CD's. The reading message is on flashing but doesn't go any further Submitted on 13-12-2022 at 14:22

    Reply Report abuse
  • I have a Roberts Blutune sound system which has not been greatly used however it has now decided not to perform a number of functions, firstly it will not automatically set the time further to this it will not load any radio channels. I have tried a system reset with no success can you suggest a solution.
    Regards Michael Davies Submitted on 11-8-2022 at 19:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roberts Radio Blutune 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roberts Radio Blutune 200 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roberts Radio Blutune 200

Roberts Radio Blutune 200 User Manual - German - 64 pages

Roberts Radio Blutune 200 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info