Manual Roberts Radio Blutune 200 (page 18 of 64) (English)

612992

Zoom out

Zoom in

1/64

Operating your radio - Search tuning FM

1. Fully extend the telescopic aerial. The aerial should be fully extended

and positioned vertically for optimum reception.

2. Press and release the On / Standby button to switch on your sound

system.

3. Press and release the Mode button until the FM band is selected.

4. Press and hold down the Tuning Up button for 2 - 3 seconds to cause

your radio to search from low frequency to high frequency and to stop

automatically when it ﬁ nds a station of sufﬁ cient strength.

5. After a few seconds the display will update. The display will show the

frequency of the signal found. If the signal is strong enough and there

is RDS data present then the radio will display the station name.

6. To ﬁ nd other stations press and hold the Tuning Up button as before.

7. Press and hold down the Tuning Down button for 2 - 3 seconds to

cause your radio to search from high frequency to low frequency and

to stop automatically when it ﬁ nds a station of sufﬁ cient strength.

8. When the end of the waveband is reached your radio will recommence

tuning from the opposite end of the waveband.

9. Adjust the Volume to the required setting.

10. To switch off your radio press and release the On / Standby button.

Note:

If you ﬁ nd that FM reception is poor, try repositioning the telescopic aerial.

Fully extend and position vertically for optimum reception. If you ﬁ nd that

an FM broadcast has a lot of background hiss, this may often be reduced

by setting the radio into Mono reception mode for the current FM station.

Please refer to the section 'Stereo / Mono setting - FM' on page 20 for

further details.

2,10

4,6

89.30MHz

Scanning...

I am unable to play cd's. The reading message is flashing but doesn't go any further Submitted on 13-12-2022 at 14:24
Reply Report abuse
I am unable to play CD's. The reading message is on flashing but doesn't go any further Submitted on 13-12-2022 at 14:22
Reply Report abuse
I have a Roberts Blutune sound system which has not been greatly used however it has now decided not to perform a number of functions, firstly it will not automatically set the time further to this it will not load any radio channels. I have tried a system reset with no success can you suggest a solution.
Regards Michael Davies Submitted on 11-8-2022 at 19:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roberts Radio Blutune 200 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roberts Radio Blutune 200

Roberts Radio Blutune 200 User Manual - German - 64 pages

Roberts Radio Blutune 200 User Manual - French - 64 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roberts Radio Blutune 200 Manual

Product: