612992

Roberts Radio Blutune 200 Manual

11
Zoom out
Zoom in
Previous page
1/64
Next page
10
Operating your sound system - DAB
1. Fully extend the telescopic aerial.
2. If your sound system is in standby mode, press and release the
On / Standby button to switch it on.
3. Press and release the Mode button until the DAB mode is selected.
The display will show 'DAB' for a few seconds.
4. If this is the fi rst time the sound system is used a scan of Band III
DAB channels may be carried out (depending on whether scanning
was already completed in standby mode). If the radio has been used
before, the last used station will be selected.
5. When fi rst switched on, the fi rst station in the list of stations found will
be played. The display will show the station name on the upper line
of the text display and broadcast information on the lower line.
6. If the station list is still empty after the scan operation or if the selected
station cannot be received your radio will display 'No DAB station'.
7. If no signals are found it may be necessary to relocate your sound
system to a position giving better reception, and then repeat the scan
using the Auto-tune facility (see Finding New Stations on page 13).
Note: that radio station name and frequency displays shown in this user
guide may differ from those that you see on your radio. Broadcasters may
change radio station names that are transmitted, and the frequencies
used for DAB and FM radio stations may not be the same in all parts of
the country.
3
DAB Radio
2
DAB
Scanning... 28
No DAB Station
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

roberts-radio-blutune-200

Reset search

  • I am unable to play cd's. The reading message is flashing but doesn't go any further Submitted on 13-12-2022 at 14:24

    Reply Report abuse

  • I am unable to play CD's. The reading message is on flashing but doesn't go any further Submitted on 13-12-2022 at 14:22

    Reply Report abuse

  • I have a Roberts Blutune sound system which has not been greatly used however it has now decided not to perform a number of functions, firstly it will not automatically set the time further to this it will not load any radio channels. I have tried a system reset with no success can you suggest a solution.
    Regards Michael Davies Submitted on 11-8-2022 at 19:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roberts Radio Blutune 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roberts Radio Blutune 200 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roberts Radio Blutune 200

Roberts Radio Blutune 200 User Manual - German - 64 pages

Roberts Radio Blutune 200 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info