Manual Robbe Futaba T8FG (page 67 of 123) (English)

467089

Zoom out

Zoom in

1/123

●Selectthefunction name

and return to the Linkage

menu by touching the

RTN button.

<SensorTouch™>

T1-T4 SET.

Digital trim settings

This function adjusts the digital trim's step

amount and operation mode (T1~T4.)

When the flight conditions are set, the trim

operation can be coupled with the conditions when

combination mode is selected.

The T8FG's unit of trim is displayed on the home

screen.

Control step amount setting

1. Move the cursor to the [STEP] item and touch

the RTN button to switch to the data input

mode.

2. Set the control step amount by scrolling the

touch sensor.

Initial value: 4

Adjustment range: 1~200

*When the RTN button is touched for one second, the control

step amount is reset to the initial value.

*When the value is increased, the change per step becomes

larger.

3. Touch the RTN button to end adjustment and

return to the cursor mode.

Separate/combination mode selection

1. Move the cursor to the [MODE] item and

touch the RTN button to switch to the data

input mode.

2. Select the mode by scrolling the touch

sensor.Aconrmationmessageappears.

*The display blinks.

[COMB.]: Combination mode. The trim's data

isreectedinallightconditions.

[SEPAR]: Separate mode. Trim adjustments

are made in d i v idually fo r ea c h fl i g ht

condition.

3. Touch the RTN button. (To terminate the input

and return to the original state, touch the S1

button.)

Display unit selection

1. Move the cursor to the [UNIT] item and

touch the RTN button to switch to the data

input mode.

2. Select the mode by scrolling the touch

sensor.Aconrmationmessageappears.

*The display blinks.

[--]: A step number is displayed on the home

screen. There is no unit display.

 [%]:"%"isdisplayedasaunit.

3. Touch the RTN button. (To terminate the input

and return to the original state, touch the S1

button.)

Trim Memory Operation procedure

1. Move the cursor to the [T1-T4 MEMORY] item

and touch the RTN button to switch to the

data input mode.

2. Select the ACT mode by scrolling the touch

sensor.Aconrmationmessageappears.

*The display blinks.

[INH]: Inhibited

[ACT]: Activated

3. Touch the RTN button. (To terminate the input

and return to the original state, touch the S1

button.)

4. At the home screen, move the cursor to the

trim you want to change and touch the RTN

for one second. The trim display is moved to

the center position.

*When the function is inhibited, the trim position returns to

the actual trim position.

Only the trim displayed on the home screen can

be moved to the center position without changing

the actual trim's memory position.

●Select[T1-T4SET.]intheLinkagemenuandaccess

the setup screen shown below by touching the

RTN button.

(The display screen is an example. The

screen depends on the model type.)

●Trimoperationmode

"COMB.": Combination mode

"SEPAR": Separate mode

Scrolling

●Movingcursor

●Selectingmode

●Adjustingvalue

●Tonextpage

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba T8FG in the language / languages: English as an attachment in your email.

The manual is 10,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba T8FG

Robbe Futaba T8FG User Manual - German - 72 pages

Robbe Futaba T8FG User Manual - Dutch - 123 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robbe Futaba T8FG Manual

Product: