Manual Robbe Futaba T8FG (page 20 of 123) (English)

467089

Zoom out

Zoom in

1/123

Installation and Removal of the HT6F1700B

Transmitter Battery

Attachment of the battery

1. Slide the battery cover on the bottom of the

transmitter toward the right side and open it.

2. Install the battery in the holder.

3. Connect the battery connector.

•Battery

•Battery Connector

4. Close the battery cover completely.

Battery Removal

Note: If you remove the battery while the

power is on, the data you have set will not

be saved.

1. Open the battery cover.

2. Disconnect the battery connector.

3. Pull up the right side of the battery and

remove the battery.

4. Close the battery cover completely.

󾙏

Warning

󾙋

Be careful not to drop the battery.

󾙍

Never disconnect the battery connector

from the T8FG transmitter after turning

off the power until the screen is completely

blank and the transmitter has shut down

completely.

* Internal devices such as memories may be damaged.

* If there is any problem, the message "Backup Error" will

be shown the next time when you turn on the power of

the transmitter. Do not use the transmitter as it is. Send it

to the Futaba Service Center.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba T8FG in the language / languages: English as an attachment in your email.

The manual is 10,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba T8FG

Robbe Futaba T8FG User Manual - German - 72 pages

Robbe Futaba T8FG User Manual - Dutch - 123 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robbe Futaba T8FG Manual

Product: