Manual Robbe Futaba T6EX (page 29 of 38) (English)

747912

Zoom out

Zoom in

1/38

To select the swashplate types:

1. Enter the programming mode and use the MODE key to access the “SWSH” function.

2. To select swashplate type press the DATA INPUT lever upward or downward for about two

seconds. When you are changing swashplate type to 1-S, 3-S or 3-E, the 1-S, 3-S or 3-E on

the display ﬂashes slow, becomes rapid, and then returns slow ﬂashing with conﬁrmation

sound.

3. Now set the swashplate type.

To set the swash AFR:

This function can be used only when you select the 3-S or 3-E swashplate type. There is no swash AFR setting with 1-S type.

This swash AFR function is for changing the direction and amount of servo movement on aileron, elevator, and pitch.

At ﬁrst, set the linkage and servo horn length on aileron, elevator, and pitch servos by following the instruction manual that

comes with the model. Basically “EPA” (see page17) is set near 100% with these three servos. Set the servo “reverse” function

(see page16) so that the swashplate keeps horizontal and moves in the correct direction up and down when you operate pitch

control (up and down throttle stick).

1.Enter the programming mode and use the MODE key to access the “SWSH” function.

2. Swashplate types, Conﬁrm 3-S or 3-E type is selected. If 3-S or 3-E type is not selected,

please see “To select the swashplate types” and set.

3. Use SELECT key to select the channel you wanted to set. Aileron channel “CHA” is

displayed at ﬁrst and “%” is ﬂashing.

Move the aileron stick left and right to set the direction and amount of movement on the

aileron servo by pushing up or down DATA INPUT lever. Aileron movement can be adjusted

from -100% to +100% .

4. Select other channels (elevator and pitch) by SELECT key to set the direction and amount

of servo movement in same manner as aileron channel setting.

“CHE” is elevator and “CHP” is pitch channel on the Display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba T6EX in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robbe Futaba T6EX Manual

Product: