467096
125
Zoom out
Zoom in
Previous page
1/128
Next page
124
<Data>
Point curve (POINT) adjustment
(Point)
Up to 17 or 11 points curve can be used.
(differs with functuion)
Initial point number: 9 points (17 points
curve), 11 points (11 points curve)
*The set points can be freely increased, decreased, and
offset.
[Rate adjustment of each point]
1. Use the EDIT dial to move the cursor
(reverse-display) to the [POINT] or [RATE]
item and push the EDIT button to switch to
the curve setting mode.
*It is changed from the reverse-display to the square box
display.
*In this mode, push the EDIT button to switch the [POINT]
item and [RATE] item alternately.
2. Move the cursor (square box) to the
[POINT] item by pushing the EDIT button.
3. Turn the EDIT dial to the left or right and
select the point whose rate you want to
set.
*The mark on the curve shows the currently selected
point. The mark on the curve shows the currently
deleted point.
4. Move the cursor (square box) to the [RATE]
item by pushing the EDIT button and set
the rate by turning the EDIT dial to the left
or right.
Repeat steps 2 through 5 and adjust the
curve.
Push the S1 button to end adjustment and
return to the cursor move mode.
[Point addition]
1. In the curve setting mode, push the EDIT
button to move the cursor to the [POINT]
item and turn the EDIT dial to the left or
right and move the cursor on the curve to
the position (mark
) you want to add.
2. When the EDIT button is pushed for 1
second, the point is added.
[Point deletion]
1. In the curve setting mode, push the EDIT
button to move the cursor to the [POINT]
item and turn the EDIT dial to the left or
right and move the cursor on the curve to
the position (mark
) you want to delete.
2. When the EDIT button is pushed for 1
second, the point is deleted.
[Offsetting the curve horizontally in the vertical
direction]
1. Use the EDIT dial to move the cursor
(reverse-video) to the [OFFSET] item.
2.
Move the curve in the vertical direction by
turning the EDIT dial to the left or right.
Initial value: +0.0%
(When the EDIT button is pushed for 1 second, the curve is
reset to the initial value.)
Push the EDIT button to end adjustment
and return to the cursol move mode.
125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robbe Futaba T-12 FG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba T-12 FG in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba T-12 FG

Robbe Futaba T-12 FG User Manual - German - 78 pages

Robbe Futaba T-12 FG User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info