467096
13
Zoom out
Zoom in
Previous page
1/128
Next page
13
<Before Use>
•Removing and storing the antenna
To remove the antenna from the storage
compartment, grasp the end of the antenna and pull
it out.
To store the antenna, push it in until it is locked.
If the antenna is not pushed in all the way, it may
fall out.
ƔAntenna
•Mounting and dismounting the antenna
Mount the antenna by turning it clockwise until
it locks in place.
Clockwise
When dismounting the antenna, turn the antenna
counterclockwise
•Angle adjustment of the antenna
You can change the angle of the antenna, as
you like. Use 2.5mm hexagonal wrench to turn
counterclockwise to release the screw on the left
of the antenna holder, and change the angle of the
antenna, as you like, then retighten.
Screw
Monitor LED display
The status of the transmitter is displayed by LED
at the bottom left and right sides of the "T12FG"
logo.
LED (Red)
Displays the status of the RF module.
• Blink
When the RF module is not connected, an
RF module of a frequency different from
the transmitter setting, or the RF module is
abnormal, the LED blinks.
• On
The LED lights steadily when the proper RF
module is connected.
Displays the "non-default condition" warning.
• Blink
Power switch is turned on when any
condition switch is in the ON state.
LED (Green)
Displays the state of transmission of radio waves.
• Off
Radio waves are in the OFF state.
• On
Radio waves are being transmitted.
• Slow blink
Trainer function is set to the student mode
(radio waves OFF).
Switch (SA-SH)
(Switch Type)
• SA : 3 positions; Alternate; Short lever
• SB : 3 positions; Alternate; Long lever
• SC : 3 positions; Alternate; Long lever
• SD : 3 positions; Alternate; Short lever
• SE : 3 positions; Alternate; Short lever
• SF : 2 positions; Alternate; Long lever
• SG : 3 positions; Alternate; Short lever
• SH : 2 positions; Momentary; Long lever
*You can choose switch and set the ON/OFF-direction in the
setting screen of the mixing functions.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robbe Futaba T-12 FG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba T-12 FG in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba T-12 FG

Robbe Futaba T-12 FG User Manual - German - 78 pages

Robbe Futaba T-12 FG User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info