Manual Robbe Futaba FX-40 (page 57 of 105) (English)

520094

Zoom out

Zoom in

1/105

Model menu

Flight modes

FX-40

The first step is to determine the source of the flight mode

to be copied by activating the appropriate field. The flight

mode to be copied is selected from the list, as shown

below.

The selected flight mode (the one to be copied) is now dis-

played in the ‘Source’ field. Now mark the field into which

the destination is to be entered. Once again the select list

appears, where you can choose the flight mode which is to

be overwritten.

When everything has been set correctly - as in the screen

shot shown below, for example - initiate the copy process

by marking the ‘Copy’ field.

This action starts the copy process, but it is only carried out

when you confirm the security query with ‘Yes’. The data

content of the destination flight mode is then copied to the

specified location.

• Determining the delay time

In the list of flight modes, mark the one whose priority you

wish to alter, then activate the ‘Delay’ field. The screen now

looks like this:

The adjustment range is 0 to 27 incr

ements: the higher the

number, the longer the delay time. The maximum delay (27

incr

ements) corresponds to a duration of nine seconds. The

default setting is always ‘0’, i.e. there is no programmed

delay time as standard.

Now move to the ‘Delay’ column and mark the field for the

channel which is to be assigned a delay time. You will now

see an additional set of three button fields in the bottom

right corner of the screen. The delay time can be increased

or reduced using the two ‘Arrow’ buttons. Pressing the

‘Reset’ button restores the default value of ‘0’.

In the display below a delay value of four increments has

been entered for the elevator (channel 1) when the flight

mode is switched; this corresponds to a time of around

1.33 seconds.

You can also determine whether the delay time for that

channel is to apply only to the currently active flight mode

(separate) or to all flight modes (global). When you touch

the corresponding field, the display changes from ‘Sepa’ to

‘Glob’, or vice versa. If you change this setting, the altera-

tion takes effect when you answer the security query with

‘Yes’.

• Naming flight modes

Mark the flight mode in the list whose name you would like

to change, then activate the ‘Name’ field. The scr

een dis-

play now looks like this:

The on-scr

een ‘keyboard’ is used to enter your chosen

name, which can be a maximum of 32 characters long. The

input process must be concluded by pressing ‘Return’;

selecting ‘ESC’ interrupts the process.

• Changing priorities

When you set up at least a third flight mode, two arrows

appear in the ‘Priority’ field when you mark the second or

additional flight modes; this field enables you to change the

priority of the flight modes.

• Erasing flight modes

Mark the flight mode in the list which you wish to erase,

then activate the ‘Erase’ field. A security query appears;

confirm with ‘Y

es’, and the flight mode is erased.

Note:

If the ‘Normal’ flight mode is not active when you switch the

transmitter on, a war

ning appears on the screen together with

a security query

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba FX-40 in the language / languages: English as an attachment in your email.

The manual is 3,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba FX-40

Robbe Futaba FX-40 User Manual - German - 105 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robbe Futaba FX-40 Manual

Product: