Manual Robbe 9CAP (page 91 of 103) (English)

467091

Zoom out

Zoom in

1/103

GOVERNORS:

What is a governor? A governor is made up of a set of sensors which read the RPM of the helicopter’s head, and a control

unit that automatically adjusts the throttle setting to maintain a constant head speed regardless of changes in pitch of blades,

weather conditions, etc. Governors are extremely popular in competition helicopters due to the consistency provided.

How does it help in helicopter setup? The governor eliminates the need to spend large amounts of time setting up throttle

curves, as it automatically adjusts the engine’s RPM to maintain the desired head speed.

GOVERNOR: The Governor mixing function is used to adjust the GV-1 (Governor) speed settings (rS1, rS2, rS3) from the transmitter.

(If you are using a different governor, follow the manufacturer's instructions.)

Adjustability:

• On/off may be separate from speed switching by plugging governor on/off into ch8 and changing CUT-CH setting.

• If using separate on/off, switch assignment is totally adjustable. Be careful not to assign governor off to a condition

switch if you want the governor to function in that condition.

GV-1 connections

Magnetic sensor

Throttle servo

Control amp

Mixture servo

Connected only when

fuel mixture function

used.

Throttle

channel

Speed setting channel

Connected when speed set from

transmitter

Governor ON/OFF / Mixture trim channel

Connected when the governor is turned on and off

from transmitter and when mixture trim function is

used, or when mixture curve data is sent from transmit-

ter to governor

Receiver

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robbe 9CAP in the language / languages: English as an attachment in your email.

The manual is 4,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe 9CAP

Robbe 9CAP User Manual - Dutch - 83 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robbe 9CAP Manual

Product: