592100
7
Zoom out
Zoom in
Previous page
1/32
Next page
EnglishEnglish
ENCODING OF PHONO INTO MP3 FILE
The system is able to ENCODE music from TURNTABLE to MP3 format and recording at
memory media with USB connecting port.
REMARK:
- The recording speed is 1:1 and according to the actual plying time of the track
- The system will creat a “ AUDIO “ folder and then store the encoding track in it.
- The recording format is preset at MP3 bit rate : 128 kbps, sampling rate : 44.1khz
- No song title will be recorded during encoding mode
- To interrupt the recroding, press the RECORD button again during record mode.
- Recording will be completed only entire song being encoded, if terminate the
encoding process intermediately, there is no track being recorded nor stored to
the USBor SD/MMC card.
COPYING OF MP3/WMA FILE FROM USB TO MMC
By pressing the “ RECORD “ button (3) the system will copy the files from to the USB to the
MMC card, and the system will switch to copying mode only if MP3/WMA file is being read.
REMARK:
- The system will store the file to USB source first if both USB and SD slot are being
occuplied by storage media.
- If press the Record button during playback of USB or SD source, the file will copy
from USB to SD or SD to USB.
A) PHONO ENCODING
1) Set the Function button to “ PHONO mode and then press the RECORD “ button (3)
directly.
2) The LCD display with show the word USB and then flashing, and then display
& and flashing after few seconds. Now the system is starting the
encoding mode.
3) Start playback at PHONO for the track which you want to record to USB.
4) After finishing of recoding, press and hold the RECORD button (3) until the LCD
stops flashing and returns to PHONO mode.
B) ENCODING BITRATE (BY REMOTE HANDSET)
You can select the desired BITRATE during ENCODING from PHONO to USB, the selectable
range from 32 / 64 /96 /128 / 192 / 256 Kbps.
1) Set in PHONO “ function (7) & remain in stop mode.
2) Press the INFO function and the LCD display will show the default bitrate (128
Kbps)
3) Press skip or buttons (7) to select the desired bitrate for encoding.
4) Press again the INFO to confirm the setting and the lcd display (2) resume to
phono mode
REMOVING OF USB / MEMORY CARD
To remove the USB / MEMORY CARD, turn off the power or switch the function mode to
either AUX or TUNER first. For USB port – un-plug it by pulling out the USB socket directly,
for memory card press the memory card inward & then release, now the card being
partially eject and you can remove it by hand.
LINEOUTCONNECTION
You can connect the system to your home Hi-fi system by connecting the LINE OUT socket
(27) to the auxiliary input socket with a RCA cable (not included).
9 10
SPECIFICATIONS
Power Supply
AC: 230V ~ 50Hz
RC Battery: 2 x AAA(UM-4) 1.5V (not included)
Radio Frequency Coverage
FM: 87.5 - 108MHz
MW: 522 - 1620kHz
Power output 2 x 2 W RMS (10% THD)
Design and specifications are subject to change without notice.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar TTR-8632UCEN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar TTR-8632UCEN in the language / languages: English, German, French, Italian, Portuguese, Spanish, Spanish as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info